Products

Quickly conduct heat out and blow it into the nearby air 1. Please wipe the outside of the body gently with a neutral detergent and keep it dry 2 The inside of the stainless steel tank needs to be cleaned with clean water every day for impurities settled after distillation, monthly (it depends on the amount of dirt in the tank). Note (hot) water into the stainless steel tank to slightly higher than the dirt performance. Pour one to four tablespoons (depending on how dirty the tank is) of cleaning agent into the tank. Do not close the cover, plug in the main power supply, press the start button, and heat the stainless steel tank. #15. Pour out the water after 30 minutes and rinse the inside with clean water. If all the dirt cannot be removed at one time, the above actions can be repeated. The remaining dirt will not affect your health, please rest assured to use. 3. The water storage bucket can be disinfected and cleaned with hot (hot) water and will not deform. 4. In order to make the homemade distilled water more mellow, you can replace a water outlet every 2-3 months.

Pano: •Provide you with high diagnosis accuracy and better treatment on diseasesof the full dentiton and jaw. •Easy to get HD panoramic images by building a perfect tomographic track combined with the motion of the X, Y and Sita axis. CT : •A versatile helper to clearly display patient's anatomical structure with flexible FOV. •lntelligent imaging technology makes free observation from angle realizable. •Accurate measurement of the distance, area,volume and outline contour makes the one-key panoramic image obtained from the 3D image simple and easy. Cephalometric •Othodontic specialist's best choice making orthodontic treatment and maxillofacial surgery efficient and accurate. •Low-dose radiation and high gray realized by dual-level alignment adjustment to provide you with HD cephalometic images. •Unique algorithms of HRPBR image reconstruction and WE image processing •Leading technology intelligently generating HD pano images to provide with more clinical details and high diagnosis accuracy •Intelligent de-noise algorithm significantly improving image's resolution b yreducing image's noise and distortion •Variety of shooting modes: HD scanning, SD scanning, root canal scanning  •Special-designed algorithm of mental artifact removal providing with high quality images by removing artifacts caused by absorbent materials •CUDA high-speed image reconstruction High configuration and performance High Quality Flat Panel Detector Large surface and dynamic FPD ensure sensitivity and accuracy Metal Artifact Removal Effectively remove artifact caused by absorbent materials from the images with clearer details of human tissues displayed.

DKA-807301    DKA-807300  DKA«801014 Specification: 4 Well: 50x50x10mm 2 well: 50x27.6x10mm Mixing rod: 110x4mm Packing: 200pcs/bags, 19bags/ctn 240pcs/bags 24bags/ctn 100pcs/bags, 50bags/ctn Weight: 12kg/9kg/8.5kg

European class B standard More faster sterilization speed 2 vacuum pumps with ULVAC brand 10 programs USB port Printer built-in Chamber: Φ 247mmX350mm Power:1800W 1. It can maintain two high-speed handpieces and one low-speed handpiece at the same time. 2. Suitable for different brands handpieces. 3. Sealed door can effectively reduce the spread of oil mist to a minimum and ensure a clean working environment. 4. Air button can remove excess residual oil in the handpiece after the oil filling and cleaning.

This portable dental X-ray unit is high frequency machine. The body is small, light weight and nearly no radiation. It has excellent image quality, portable storage, save more space. It uses high frequency and DC international power supply. All of the components installed in the central PC board concentrated. Shock, set-up, electron tubes, all of them are insulation vacuum, sealed stereotype protection. There are also manual buttons installed on the surface of shell, as well as batteries and charges. This unit mainly suitable for oral pre-treatment for learning internal organizational structure, root depth and so on, is indispensable in daily life clinic equipment, especially for dental implant surgery. It also can connect with sensor, is great convenience. Checking and Security !  Caution: Please learn relative security measures and functions given in the file or on the unit. * Using the products after checking battery and the location of the device, make sure that is operates properly. * Checking all the power cords whether correctly and connected formally. * Operating the device in the designated order. * Recheck the cone connect with the patient’s face closely. * Keep the device and the cone clean. * Please use or operate the device and parts after taking a necessary periodic inspection. * If you discover some difference in the sensor images even if you inspected its x-ray exposure time in the same way as before, then it means that the radiation of x-ray is abnormal, you must stop using it immediately and allow it to be inspected. * Don’t use or store near the place which is possible to fire. * Don’t use or store where air pressure or temperature or moisture exceeds range. * Keep good ventilation and avoid direct sunlight, protect against the eroding of dust and corrosive air. * Don’t use or store near to chemicals or combustible gas. Tube voltage 60KV Tube current 1.5mA Exposure time 0.1--2.0s Frequency 30KHz Rate power 60VA Distance from skin to cone 130mm Tube focus 0.3mm*0.3mm Battery DC14.8V  6400mAh Charger input voltage AC100V-240V±10% Output voltage DC16.8V Ambient temperature 5℃~40℃ Relative temperature <75%RH Net weight 2.5KG Gross weight 3.5KG Size(mm) 138*165*185 Package size(mm) 365*330*265

Planmeca ProMax® is a complete maxillofacial imaging system. The design and operation principles are based on the latest scientific research, technological  innovations and the most demanding needs of modern-day radiology. Advanced technology •  Autofocus positions the focal layer automatically for perfect panoramic images •  Dynamic Exposure Control (DEC) measures the patient’s radiation transparency and automatically adjusts exposure values •  Patented SCARA (Selectively Compliant Articulated Robot Arm) technology guarantees an anatomically correct imaging geometry for clear, error-free images •  Easy upgrades – add cephalostat or 3D imaging capability at any time Effortless use •  Full-view patient positioning with triple-laser patient positioning lights •  Side entry for comfortable access •  Easy-to-use graphical interface •  Versatile Planmeca Romexis® 2D imaging software •  TWAIN support and full DICOM compliance Planmeca ProMax X-ray unit provides a wide range of extraoral imaging modalities: panoramic imaging for dental arch maxillary sinus imaging temporomandibular joint imaging 2D linear tomography cephalometry  Open positioning and easy use Free view to the patient from all directions Three laser positioning laser beams Easy access also for wheelchair patients Motorized patient positioning and temple supports Autofocus feature makes the positioning of the focal layer automatically. Autofocus takes first a short, low-dose scout image for searching landmarks and calculating the focal layer with the help of a special neural network algorithm. The user can monitor the suggested focal layer adjustment both on the control panel and on the image acquisition preview. The focal layer adjustments can be amended, or the user can simply accept the adjustments and continue to the final exposure. Dynamic Exposure Control (DEC) adapts the whole imaging chain individually for each patient's physio-anatomical characteristics to produce the optimal contrast and density. Both the X-ray source and the image receptor are automatically adjusted to produce the optimum image quality. Interactive, informative and intuitive colour TFT graphic user interface (GUI) Technical factors and selected programs digitally displayed Image preview Optimised image geometry and constant magnification Optimised image geometry and constant magnification Adjustable form of focal trough Automatic compensation for the cervical vertebrae shadow Full digital control Re-programmable flash EPROM Microprocessor controlled self-diagnostic control system with clear help guiding to correct use and error messages announcing hardware or software problems Constant potential, microprocessor controlled resonance mode generator Very high operating frequency 80 – 150 kHz Maximum ripple 670 Vpp (0.4%, 84 kV) Ultra short rise time, < 3 ms Very wide exposure parameters range, 1 – 16mA / 54 – 84 kV2(5) Low patient dose Universal power input including Power Factor Corrector, mains voltage fluctuations automatically compensated Reliable mechanical construction Small size and light weight, total weight 113 kg (249 lbs) Unique 3 joint SCARA (Selectively Compliant Articulated Robot Arm) technology enables complicated movements and versatile imaging geometries, smooth and quiet micro-step motors Telescopic body column without counterweight. Maximum height adjustable. Automatic four blade primary collimator Available as wall-mounted or free standing  Imaging mode: Basic panoramic programs Horizontal and Vertical segmenting Bitewing panoramic program Tomography: Digital tomography, Transtomography Child mode in all imaging programs to reduce the dose and to optimise the imaging geometry Cephalostat Planmeca ProCeph “one shot” cephalostat Digital Ceph Dimax4 (2 fixed sensors or 1 movable sensor) DEC (Dynamic Exposure Control): Panoramic DEC Cephalostat DEC Autofocus Additional features: Accessory cabinet 

Quickly conduct heat out and blow it into the nearby air 1. Please wipe the outside of the body gently with a neutral detergent and keep it dry 2 The inside of the stainless steel tank needs to be cleaned with clean water every day for impurities settled after distillation, monthly (it depends on the amount of dirt in the tank). Note (hot) water into the stainless steel tank to slightly higher than the dirt performance. Pour one to four tablespoons (depending on how dirty the tank is) of cleaning agent into the tank. Do not close the cover, plug in the main power supply, press the start button, and heat the stainless steel tank. #15. Pour out the water after 30 minutes and rinse the inside with clean water. If all the dirt cannot be removed at one time, the above actions can be repeated. The remaining dirt will not affect your health, please rest assured to use. 3. The water storage bucket can be disinfected and cleaned with hot (hot) water and will not deform. 4. In order to make the homemade distilled water more mellow, you can replace a water outlet every 2-3 months.

Quickly conduct heat out and blow it into the nearby air 1. Please wipe the outside of the body gently with a neutral detergent and keep it dry 2 The inside of the stainless steel tank needs to be cleaned with clean water every day for impurities settled after distillation, monthly (it depends on the amount of dirt in the tank). Note (hot) water into the stainless steel tank to slightly higher than the dirt performance. Pour one to four tablespoons (depending on how dirty the tank is) of cleaning agent into the tank. Do not close the cover, plug in the main power supply, press the start button, and heat the stainless steel tank. #15. Pour out the water after 30 minutes and rinse the inside with clean water. If all the dirt cannot be removed at one time, the above actions can be repeated. The remaining dirt will not affect your health, please rest assured to use. 3. The water storage bucket can be disinfected and cleaned with hot (hot) water and will not deform. 4. In order to make the homemade distilled water more mellow, you can replace a water outlet every 2-3 months.

Type: XF FF MF F FM M ML L XL Packing: One type or Mixed 100pcs/box

The ultrasonic cleaner is a microprocessor-controlled device that uses ultrasonic or high frequency sound waves to clean jewelry and other delicate items. Ultrasonic cleaning is based on the cavitation effect caused by high frequency ultrasonic wave vibration signals in fluid. Microscopic bubbles that expand and rapidly collapse cause cavitation, which creates an effective cleaning action on the surface of object being cleaned. Additionally, the bubbles are small enough to penetrate even microscopic crevices, cleaning them thoroughly and consistently.  High efficiency saves cleaning solvent, thermal energy, work place and labor!  Three sets of built-in powerful transducers can strengthen the ultrasonic power and make superior cleaning outcome. It is utilization of digital program in ultrasonic cleaner to control the unit, according to the quantity and condition of the items to be cleaned to choose a working cycle time. As a result, it is more convenient and efficient than hand wash, steam cleaners, high pressure water jet cleaning or other machines. Advanced Brushed Stainless Steel Cleaning Tank to avoid corrosion water stain and keep the tank looking always new. (In comparison, the common stainless steel cleaning tanks will be dirty yellow corrosion water stain on the surface after a long time of using, and it's hard to be removed.) Power Voltage: AC220V/50Hz or AC110V/60Hz Fuse Tube: 2A, 250V Ultrasonic Power: 120W Heating Power: 150W Time: 1~99Minutes Temperature:20℃ ~ 80℃ Dimension of Cleaning Slot: 24*14*15cm Professional Use: Medical and Dental Clinics, Tattoo Shops, Scientific Labs and Golf Clubs. Jewelers, Opticians, Watchmakers, Antique Dealers and Electronics Workshops etc.

Specification: Seal speed: 10±0.5m/min      Power: 500W Seal width: 12mm                  Weight: 18kg Seal margin: 0-35mm            Temperature range: 60-220℃ Temperature error ≤1%          Dimension: 560 x260x 220mm AC Power According to customer requirements 1.7 Color capacity touch screen, with Android operation system graphical user interface, built-in clock, and parameter scan be set up and stored; 2.In-built color touch control screen can be used without computer connection to set up or change the operation parameters, with English input methods or using optional scanning gun; 3.8 million records of sealing and printing information can be inquired by printing parameters database or you can use wireless router to adjust them; 4.Safe operation: If the sealing temperature and sealing pressure exceeds setting range, the machine will automatically stop working, which effectively guarantees the seal quality and safety; 5.Printing system can print medical device labels, marks and information; Printing of sterilization date,expiry date, lot No., Sterilizer No., operators and department conforms to relevant standard. 6.With in-built printer font width, space are adjustable, convenient for more information to be printed on narrow pouches; print function can be closed with one-key or partially activated;