Products

1 Use the intermational advanced technology 2 high-efficiency and clear imaging, low leaking radiation is only 1% of national standard 3 Light touched button, controled with microcomputer, only press one button to select the exposue parameter, cibvebuebt  fast and accurately 4 Developing in light room, image in one minute, the doctor can diagnose conveniently for maximum 5 Pneumatic up-down seat, more convenient and more comfortable 6 It is for the use of the digital imaging system of mouth Specifications Power supply: 220V±10%,50HZ,1KVA Tube voltage 70KV Tube current 8mA Focus size 0.8mm or 0.4mm(as per demand of end-user) Total filtration 2.5mmAL Exposure time 0.2-4s Leak radiation: outside one meter≦0.002mGy/h，（national standard:0.25mGy/h） Package size: 152*57*26(cm) Net weight: 57kg 1. In order to ensure safety in operation and use, good ground lead must be installed well. 2. Because small X-ray machine’s thermal capacity is limited, attention should be paid to making the machine work intermittently. 3. Only during exposure process this machine will produce X-rays. It won’t produce X-rays in power-off state, neither in power-on state as long as not in exposure. 4. If any unforeseen circumstances occur during correct use, operators should cut off the power immediately and stop using the machine. It cannot be used again until it is overhauled and qualified. 5. Before leaving the factory, each X-ray device is equipped with an additional filter plate with the following specifications: 1.0/0.5mm aluminum sheets. 6. Every time when disassembling the machine, disassemble the head first and then other parts. 8. Every time after using the machine, recover the cross arm to the highest point, and then place the machine head in an equilibrium position. 9. Every time after using, sterilize and clean beam tube end that contacts the patient with medical alcohol. 10. Clean the machine surface with a dry cloth every week and inspect whether the connectors contact well. 11. Pay attention to machine maintenance. Check whether the indicator lights, display, rotary knob, switch, and remote control work normally; whether the X-ray source modules leak oil; whether when X-ray source modules expose produces any abnormal noise; or whether fixed screws in the mechanical part loose, and the like. 13. The rated capacity of the machine is 1.1kw. Please select power supply or power grid with a power supply capacity greater than 1.5kw. If network voltage in this region is abnormal, we recommend matching 1.5KW or higher industrial voltage stabilizer, to prevent damage to the machine and reduced machine life due to abnormal voltage.

1 Use the intermational advanced technology 2 high-efficiency and clear imaging, low leaking radiation is only 1% of national standard 3 Light touched button, controled with microcomputer, only press one button to select the exposue parameter, cibvebuebt  fast and accurately 4 Developing in light room, image in one minute, the doctor can diagnose conveniently for maximum 5 Pneumatic up-down seat, more convenient and more comfortable 6 It is for the use of the digital imaging system of mouth Specifications Power supply: 220V±10%,50HZ,1KVA Tube voltage 70KV Tube current 8mA Focus size 0.8mm or 0.4mm(as per demand of end-user) Total filtration 2.5mmAL Exposure time 0.2-4s Leak radiation: outside one meter≦0.002mGy/h，（national standard:0.25mGy/h） Package size: 152*57*26(cm) Net weight: 57kg 1. In order to ensure safety in operation and use, good ground lead must be installed well. 2. Because small X-ray machine’s thermal capacity is limited, attention should be paid to making the machine work intermittently. 3. Only during exposure process this machine will produce X-rays. It won’t produce X-rays in power-off state, neither in power-on state as long as not in exposure. 4. If any unforeseen circumstances occur during correct use, operators should cut off the power immediately and stop using the machine. It cannot be used again until it is overhauled and qualified. 5. Before leaving the factory, each X-ray device is equipped with an additional filter plate with the following specifications: 1.0/0.5mm aluminum sheets. 6. Every time when disassembling the machine, disassemble the head first and then other parts. 8. Every time after using the machine, recover the cross arm to the highest point, and then place the machine head in an equilibrium position. 9. Every time after using, sterilize and clean beam tube end that contacts the patient with medical alcohol. 10. Clean the machine surface with a dry cloth every week and inspect whether the connectors contact well. 11. Pay attention to machine maintenance. Check whether the indicator lights, display, rotary knob, switch, and remote control work normally; whether the X-ray source modules leak oil; whether when X-ray source modules expose produces any abnormal noise; or whether fixed screws in the mechanical part loose, and the like. 13. The rated capacity of the machine is 1.1kw. Please select power supply or power grid with a power supply capacity greater than 1.5kw. If network voltage in this region is abnormal, we recommend matching 1.5KW or higher industrial voltage stabilizer, to prevent damage to the machine and reduced machine life due to abnormal voltage.

This sterilizer is a safe and reliable fast desktop sterilizer equipment that adopts automatic control. Adopt European CLASS B standard, beautiful and exquisite appearance, fully comply with EN13060 European standard. It has high performance, high reliability and high safety. It provides rapid sterilization for items that are resistant to saturated steam, such as surgery, dentistry, ophthalmology, glass equipment, medicines, culture media and fabric accessories, and food. High-quality stainless steel liner, sealed cover Microcomputer control Pressure safety interlock device, high safety factor BD test, HELIX test, vacuum test LCD liquid crystal display, touch device Built-in steam generator to quickly provide saturated steam European class B Standard More faster sterilization speed 2 vacuum pumps with ULVAC brand 10 programs USB port Printer built-in Chamber: Φ247mmX450mm Power:2000W

European standard Class N Thermodynamic vacuum system Chamber 70x320mm Nominal power 1600VA 2 programs preset without print function Dimension N. W./G.W. 28/32kg Size 64*48*43cm 8L tabletop autoclave, B-class prognosis vacuum type, in line with the European standard en13060. 8L autoclave is light weight, easy to move, and requires the smallest workbench space. It is an ideal solution for small enterprises such as dental clinic, tattoo, foot therapy, beauty, veterinary and small microbiology. Automatic tabletop autoclave with preset program. Comply with European standard EN13060 Built in independent fast steam generator to ensure fast disinfection cycle Rapid vacuum drying after sterilization User friendly interface. If the door is not locked correctly, the double door protection system can prevent cycle starting. The system also prevents the door from opening if the pressure inside the chamber is not equal to the atmospheric pressure outside the chamber In case of short circuit or electrical fault, the power supply will be cut off automatically. Be able to detect and determine the exact cause of any problem and issue specific error codes to the operator. The main water level switch in the main water tank controls the minimum and maximum water levels. Maintain automatic alarm.

European standard Class N Thermodynamic vacuum system Chamber 70x320mm Nominal power 1600VA 2 programs preset without print function Dimension N. W./G.W. 28/32kg Size 64*48*43cm 8L tabletop autoclave, B-class prognosis vacuum type, in line with the European standard en13060. 8L autoclave is light weight, easy to move, and requires the smallest workbench space. It is an ideal solution for small enterprises such as dental clinic, tattoo, foot therapy, beauty, veterinary and small microbiology. Automatic tabletop autoclave with preset program. Comply with European standard EN13060 Built in independent fast steam generator to ensure fast disinfection cycle Rapid vacuum drying after sterilization User friendly interface. If the door is not locked correctly, the double door protection system can prevent cycle starting. The system also prevents the door from opening if the pressure inside the chamber is not equal to the atmospheric pressure outside the chamber In case of short circuit or electrical fault, the power supply will be cut off automatically. Be able to detect and determine the exact cause of any problem and issue specific error codes to the operator. The main water level switch in the main water tank controls the minimum and maximum water levels. Maintain automatic alarm.

1 Use the intermational advanced technology 2 high-efficiency and clear imaging, low leaking radiation is only 1% of national standard 3 Light touched button, controled with microcomputer, only press one button to select the exposue parameter, cibvebuebt  fast and accurately 4 Developing in light room, image in one minute, the doctor can diagnose conveniently for maximum 5 Pneumatic up-down seat, more convenient and more comfortable 6 It is for the use of the digital imaging system of mouth Specifications Power supply: 220V±10%,50HZ,1KVA Tube voltage 70KV Tube current 8mA Focus size 0.8mm or 0.4mm(as per demand of end-user) Total filtration 2.5mmAL Exposure time 0.2-4s Leak radiation: outside one meter≦0.002mGy/h，（national standard:0.25mGy/h） Package size: 152*57*26(cm) Net weight: 57kg 1. In order to ensure safety in operation and use, good ground lead must be installed well. 2. Because small X-ray machine’s thermal capacity is limited, attention should be paid to making the machine work intermittently. 3. Only during exposure process this machine will produce X-rays. It won’t produce X-rays in power-off state, neither in power-on state as long as not in exposure. 4. If any unforeseen circumstances occur during correct use, operators should cut off the power immediately and stop using the machine. It cannot be used again until it is overhauled and qualified. 5. Before leaving the factory, each X-ray device is equipped with an additional filter plate with the following specifications: 1.0/0.5mm aluminum sheets. 6. Every time when disassembling the machine, disassemble the head first and then other parts. 8. Every time after using the machine, recover the cross arm to the highest point, and then place the machine head in an equilibrium position. 9. Every time after using, sterilize and clean beam tube end that contacts the patient with medical alcohol. 10. Clean the machine surface with a dry cloth every week and inspect whether the connectors contact well. 11. Pay attention to machine maintenance. Check whether the indicator lights, display, rotary knob, switch, and remote control work normally; whether the X-ray source modules leak oil; whether when X-ray source modules expose produces any abnormal noise; or whether fixed screws in the mechanical part loose, and the like. 13. The rated capacity of the machine is 1.1kw. Please select power supply or power grid with a power supply capacity greater than 1.5kw. If network voltage in this region is abnormal, we recommend matching 1.5KW or higher industrial voltage stabilizer, to prevent damage to the machine and reduced machine life due to abnormal voltage.

3 high speed handpiece positions 2 high speed /1 low speed E-type motor 1 high speed /2 low speed E-type motor Mist filters (pack of 12) & Lubrication fluid & Funnel & Air filter*1pc for each Dimension: Size: 44*39*46cm N.W: 11Kg G.W: 15kg 1. It can maintain two high-speed handpieces and one low-speed handpiece at the same time. 2. Suitable for different brands handpieces. 3. Sealed door can effectively reduce the spread of oil mist to a minimum and ensure a clean working environment. 4. Air button can remove excess residual oil in the handpiece after the oil filling and cleaning.

Using the international advanced technology,efficient integrated design,high efficiency,low radiation. Using microcomputer intelligent control,not only remote controlled exposure,but more powerful function of low voltage alarm and high voltage protection. Micro focus technology,much more clear image and accurate diagnosis. The base has two modes of mobile and fixed ,pneumatic lift  soat ensures more convenient for dentist and more comfortable for patient. Can use lightroom dental film,imaging in one minute,maximum convenient dentist to diagnose. Can connect to dental digital imaging system,that is indispensable for clinicians to diagnose and root canal filling. Chip Type: CMOS APS External Dim (mm): Size 1.0 (Child/woman): 26.1*36.8 Size 1.5 (adult): 29.2*38.7 Active Area: Size 1.0 (Child/woman): 31.0*20.0 Size 1.5 (adult): 33.0*24.0 Image Pixel Size (um): 35 Active Pixels Size: 0.6mega Resolution (lp/mm)/Theoretical Heoretical: <20 Measured: <10 Dimension: N.W.: 1kg G.W.: 1.2kg Size: 27*21*8cm

The ultrasonic cleaner is a microprocessor-controlled device that uses ultrasonic or high frequency sound waves to clean jewelry and other delicate items. Ultrasonic cleaning is based on the cavitation effect caused by high frequency ultrasonic wave vibration signals in fluid. Microscopic bubbles that expand and rapidly collapse cause cavitation, which creates an effective cleaning action on the surface of object being cleaned. Additionally, the bubbles are small enough to penetrate even microscopic crevices, cleaning them thoroughly and consistently.  High efficiency saves cleaning solvent, thermal energy, work place and labor!  Three sets of built-in powerful transducers can strengthen the ultrasonic power and make superior cleaning outcome. It is utilization of digital program in ultrasonic cleaner to control the unit, according to the quantity and condition of the items to be cleaned to choose a working cycle time. As a result, it is more convenient and efficient than hand wash, steam cleaners, high pressure water jet cleaning or other machines. Advanced Brushed Stainless Steel Cleaning Tank to avoid corrosion water stain and keep the tank looking always new. (In comparison, the common stainless steel cleaning tanks will be dirty yellow corrosion water stain on the surface after a long time of using, and it's hard to be removed.) Power Voltage: AC220V/50Hz or AC110V/60Hz Fuse Tube: 2A, 250V Ultrasonic Power: 120W Heating Power: 150W Time: 1~99Minutes Temperature:20℃ ~ 80℃ Dimension of Cleaning Slot: 24*14*15cm Professional Use: Medical and Dental Clinics, Tattoo Shops, Scientific Labs and Golf Clubs. Jewelers, Opticians, Watchmakers, Antique Dealers and Electronics Workshops etc.

Designed for the simulation of clinical education Designed for the simulation of clinical education, help students develop the right operating posture in the pre-clinical study, master ergonomic skills and then smoothly transition to real clinical treatment. With JPS FT-III dental teaching simulation system, students learn right from the start, under more realistic conditions: •In a pre-clinical environment, students learn using standard treatment centre components and do not have to adjust to new equipment later in their education •Optimum treatment ergonomics with height-adjustable dentist and assistant elements •Best protection of student health, with integrated, continuous and intensive disinfection of internal water-lines •New design: dual instrument tray, makes four-hand operation come true . •Operation light: the brightness is adjustable. With different type teeth mode Manikin comes with magnetic articulator , it is compatible with different type teeth model Imitate real clinical environment. Electric motors drive the movement of the manikin----imitate real clinical environment. Easy to clean Auto reset function of manikin system- provide the cleanliness and utilization of space Artificial marble top is easy to clean Two preset position keys Two preset position keys : S1 , S2 Automatic reset key : S0 Can be set highest and lowest position With emergency stop function Hommization Suction water bottle Suction water bottle is designed to be removed and installed very easily ,improve study efficiency a lot. JPS Dental simulation experts, reliable partners, sincere forever！

Pano: •Provide you with high diagnosis accuracy and better treatment on diseasesof the full dentiton and jaw. •Easy to get HD panoramic images by building a perfect tomographic track combined with the motion of the X, Y and Sita axis. CT : •A versatile helper to clearly display patient's anatomical structure with flexible FOV. •lntelligent imaging technology makes free observation from angle realizable. •Accurate measurement of the distance, area,volume and outline contour makes the one-key panoramic image obtained from the 3D image simple and easy. Cephalometric •Othodontic specialist's best choice making orthodontic treatment and maxillofacial surgery efficient and accurate. •Low-dose radiation and high gray realized by dual-level alignment adjustment to provide you with HD cephalometic images. •Unique algorithms of HRPBR image reconstruction and WE image processing •Leading technology intelligently generating HD pano images to provide with more clinical details and high diagnosis accuracy •Intelligent de-noise algorithm significantly improving image's resolution b yreducing image's noise and distortion •Variety of shooting modes: HD scanning, SD scanning, root canal scanning  •Special-designed algorithm of mental artifact removal providing with high quality images by removing artifacts caused by absorbent materials •CUDA high-speed image reconstruction High configuration and performance High Quality Flat Panel Detector Large surface and dynamic FPD ensure sensitivity and accuracy Metal Artifact Removal Effectively remove artifact caused by absorbent materials from the images with clearer details of human tissues displayed.

3 high speed handpiece positions 2 high speed /1 low speed E-type motor 1 high speed /2 low speed E-type motor Mist filters (pack of 12) & Lubrication fluid & Funnel & Air filter*1pc for each Dimension: Size: 44*39*46cm N.W: 11Kg G.W: 15kg 1. It can maintain two high-speed handpieces and one low-speed handpiece at the same time. 2. Suitable for different brands handpieces. 3. Sealed door can effectively reduce the spread of oil mist to a minimum and ensure a clean working environment. 4. Air button can remove excess residual oil in the handpiece after the oil filling and cleaning.