Products

European B standard, microcomputer control, touch button Large screen LCD Chinese display, power on self-test The inlet configuration, three times pre vacuum degree - 0.08mpa, can completely extract the air in dressing, disinfection bag and hollow instrument gap, to achieve the best steam saturation state Strong vacuum drying system, the residual humidity of the instrument after drying is not more than 0.2% Sterilization temperature, time and vacuum times can be set by oneself With B / D test program, the vacuum leakage rate is less than 0.13kpa/min European standard Class N Thermodynamic vacuum system; Sterilizing temperature: 121℃, 134℃  Chamber size: 230mm*360mm LED display Voltage AC 220V  ±10% Frequency 50/60Hz Wire plug GB 3 cores/EN 3 cores Max Hp 1800VA Electric current 10A Physical Space  15L/12L Class  European Class N standard Sterilizing temperature 121°C,134°C Inside Chamber size 230mm*360mm Net weight 40KG

Meeting to EN13060 European standard With pre-post vacuum Quick cycle only 10-12min LED display User friendly interface Double locking system Easily accessible water tank 2 trays, max 5 optional Multiple languages Power: 1500W Size: 414*365*530mm Tray size: 147*265mm Cavity size: Φ170x320mm 1.Microcomputer control system for automatic check; 2.With precise control, the temperature can be controlled within ± 0.5 during sterilizing 3.Friendly operation interface, simply and easy 4.B&D test, vacuum test, convenient for machine behave test 5.Automatical record of the time of sterilization beginning &end. Clean the inner pipe automatically for avoiding jam after every 6.100 times of cycles. 6.The dry time is adjustable according to your will 7.The machine is dual-purpose, not only for instruments,but also for cotton, on dry condition 8.With a LED display 9.Adjustable date&time&language mode according to your will 10.Opened reservoir, convenient for cleaning, avoiding chloramphenicol alive 11.Water quality sensor can test the quality of distilled water, reduce the failure rate 12.One-piece chamber is made of imported 304 stainless steel 13.Safety valve ensure the chamber can release the pressure safely at emergency 14.Double doors locking-system, mechanical lock with electrical lock,the machine can't open until the pressure turn 0 15.Multi-safety protection system, which can ensure the safety of the operator 16.Air-conditional heat removal system, prevent the machine from over-heating 17.Adopt the ABS plastic, whole model produce 18.The machine plane can adjust by adjustable pad, provide a gradienter for free 19.Optional printer, with a internal USB module as standard collocation to record the sterilization process

Our air compressor is from one of the toppest brand in China. 20 years of production experience, unique product design and process application and perfect management system ensure the stable quality of products and establish the position of our brand in the field of oil-free air compressor. Air compressor is a commonly used machine in production equipment. It is no stranger to many enterprises.But for the choice of air compressor brand, many customers are often in a tangle of contradictions.Silent oil-free air compressor is a small piston type air compressor, often called silent oil-free air compressor.Medical silent oil-free air compressor generally needs high quality compressed gas. The machine needs strong reliability, silence, and the output air can directly contact the human body. Our oil-free compressor is specially designed for supplying oil-free dry healthy medical grade clean air in medical field. Especially in oral clinic and hospital, it can satisfy the demands from one to hundreds of dental chairs, suitable for different request. Silent box, dryer and filtration system can be added, so as to reduce the noise, improve the pressure dew point and filter accuracy.  1.Oil Free Design For Stable Oil Free Air Supplying. 2.Automatic Start-Stop Controlled By Pressure Switch, prevent burn out, ensure the safety of use. 3.Promise to adopt pure copper coil, good heat dissipation and long service life. 4.4mm air tank thickness, inner and outer fully sprayed with plastic. 5.Adopt precision parts, important parts have CE certification to ensure product quality. 6.Special plastic spraying process, good corrosion resistance 7.Could be used when the power is connected. 8.No need lubricate oil for maintenance. 9.Single phase and three phases with low fault rate and longer usage life. 10.Easy operation, low fault rate and long service life. MODEL VOLTAGE MAX AIR FLOW MAX PRESSURE YH-200 220V 150L/min 0.7Mpa Rated Power Rotation Tank Measurement 750W 1450RPM 38L 420X420X600mm Air compressor is a commonly used machine in production equipment. It is no stranger to many enterprises.But for the choice of air compressor brand, many customers are often in a tangle of contradictions.Silent oil-free air compressor is a small piston type air compressor, often called silent oil-free air compressor.Medical silent oil-free air compressor generally needs high quality compressed gas. The machine needs strong reliability, silence, and the output air can directly contact the human body. Our oil-free compressor is specially designed for supplying oil-free dry healthy medical grade clean air in medical field. Especially in oral clinic and hospital, it can satisfy the demands from one to hundreds of dental chairs, suitable for different request. Silent box, dryer and filtration system can be added, so as to reduce the noise, improve the pressure dew point and filter accuracy.  1.Oil Free Design For Stable Oil Free Air Supplying. 2.Automatic Start-Stop , prevent burn out, ensure the safety of use. 3.Promise to adopt pure copper coil, good heat dissipation and long service life. 4.4mm air tank thickness, inner and outer fully sprayed with plastic. 5.Adopt precision parts, important parts have CE certification to ensure product quality. 6.Special plastic spraying process, good corrosion resistance 7.Small body to save space. 8.No need lubricate oil for maintenance.

Planmeca ProMax® is a complete maxillofacial imaging system. The design and operation principles are based on the latest scientific research, technological  innovations and the most demanding needs of modern-day radiology. Advanced technology •  Autofocus positions the focal layer automatically for perfect panoramic images •  Dynamic Exposure Control (DEC) measures the patient’s radiation transparency and automatically adjusts exposure values •  Patented SCARA (Selectively Compliant Articulated Robot Arm) technology guarantees an anatomically correct imaging geometry for clear, error-free images •  Easy upgrades – add cephalostat or 3D imaging capability at any time Effortless use •  Full-view patient positioning with triple-laser patient positioning lights •  Side entry for comfortable access •  Easy-to-use graphical interface •  Versatile Planmeca Romexis® 2D imaging software •  TWAIN support and full DICOM compliance Planmeca ProMax X-ray unit provides a wide range of extraoral imaging modalities: panoramic imaging for dental arch maxillary sinus imaging temporomandibular joint imaging 2D linear tomography cephalometry  Open positioning and easy use Free view to the patient from all directions Three laser positioning laser beams Easy access also for wheelchair patients Motorized patient positioning and temple supports Autofocus feature makes the positioning of the focal layer automatically. Autofocus takes first a short, low-dose scout image for searching landmarks and calculating the focal layer with the help of a special neural network algorithm. The user can monitor the suggested focal layer adjustment both on the control panel and on the image acquisition preview. The focal layer adjustments can be amended, or the user can simply accept the adjustments and continue to the final exposure. Dynamic Exposure Control (DEC) adapts the whole imaging chain individually for each patient's physio-anatomical characteristics to produce the optimal contrast and density. Both the X-ray source and the image receptor are automatically adjusted to produce the optimum image quality. Interactive, informative and intuitive colour TFT graphic user interface (GUI) Technical factors and selected programs digitally displayed Image preview Optimised image geometry and constant magnification Optimised image geometry and constant magnification Adjustable form of focal trough Automatic compensation for the cervical vertebrae shadow Full digital control Re-programmable flash EPROM Microprocessor controlled self-diagnostic control system with clear help guiding to correct use and error messages announcing hardware or software problems Constant potential, microprocessor controlled resonance mode generator Very high operating frequency 80 – 150 kHz Maximum ripple 670 Vpp (0.4%, 84 kV) Ultra short rise time, < 3 ms Very wide exposure parameters range, 1 – 16mA / 54 – 84 kV2(5) Low patient dose Universal power input including Power Factor Corrector, mains voltage fluctuations automatically compensated Reliable mechanical construction Small size and light weight, total weight 113 kg (249 lbs) Unique 3 joint SCARA (Selectively Compliant Articulated Robot Arm) technology enables complicated movements and versatile imaging geometries, smooth and quiet micro-step motors Telescopic body column without counterweight. Maximum height adjustable. Automatic four blade primary collimator Available as wall-mounted or free standing  Imaging mode: Basic panoramic programs Horizontal and Vertical segmenting Bitewing panoramic program Tomography: Digital tomography, Transtomography Child mode in all imaging programs to reduce the dose and to optimise the imaging geometry Cephalostat Planmeca ProCeph “one shot” cephalostat Digital Ceph Dimax4 (2 fixed sensors or 1 movable sensor) DEC (Dynamic Exposure Control): Panoramic DEC Cephalostat DEC Autofocus Additional features: Accessory cabinet 

Pano: •Provide you with high diagnosis accuracy and better treatment on diseasesof the full dentiton and jaw. •Easy to get HD panoramic images by building a perfect tomographic track combined with the motion of the X, Y and Sita axis. CT : •A versatile helper to clearly display patient's anatomical structure with flexible FOV. •lntelligent imaging technology makes free observation from angle realizable. •Accurate measurement of the distance, area,volume and outline contour makes the one-key panoramic image obtained from the 3D image simple and easy. Cephalometric •Othodontic specialist's best choice making orthodontic treatment and maxillofacial surgery efficient and accurate. •Low-dose radiation and high gray realized by dual-level alignment adjustment to provide you with HD cephalometic images. •Unique algorithms of HRPBR image reconstruction and WE image processing •Leading technology intelligently generating HD pano images to provide with more clinical details and high diagnosis accuracy •Intelligent de-noise algorithm significantly improving image's resolution b yreducing image's noise and distortion •Variety of shooting modes: HD scanning, SD scanning, root canal scanning  •Special-designed algorithm of mental artifact removal providing with high quality images by removing artifacts caused by absorbent materials •CUDA high-speed image reconstruction High configuration and performance High Quality Flat Panel Detector Large surface and dynamic FPD ensure sensitivity and accuracy Metal Artifact Removal Effectively remove artifact caused by absorbent materials from the images with clearer details of human tissues displayed.

Meeting to EN13060 European standard With pre-post vacuum Quick cycle only 10-12min LED display User friendly interface Double locking system Easily accessible water tank 2 trays, max 5 optional Multiple languages Power: 1500W Size: 414*365*530mm Tray size: 147*265mm Cavity size: Φ170x320mm 1.Microcomputer control system for automatic check; 2.With precise control, the temperature can be controlled within ± 0.5 during sterilizing 3.Friendly operation interface, simply and easy 4.B&D test, vacuum test, convenient for machine behave test 5.Automatical record of the time of sterilization beginning &end. Clean the inner pipe automatically for avoiding jam after every 6.100 times of cycles. 6.The dry time is adjustable according to your will 7.The machine is dual-purpose, not only for instruments,but also for cotton, on dry condition 8.With a LED display 9.Adjustable date&time&language mode according to your will 10.Opened reservoir, convenient for cleaning, avoiding chloramphenicol alive 11.Water quality sensor can test the quality of distilled water, reduce the failure rate 12.One-piece chamber is made of imported 304 stainless steel 13.Safety valve ensure the chamber can release the pressure safely at emergency 14.Double doors locking-system, mechanical lock with electrical lock,the machine can't open until the pressure turn 0 15.Multi-safety protection system, which can ensure the safety of the operator 16.Air-conditional heat removal system, prevent the machine from over-heating 17.Adopt the ABS plastic, whole model produce 18.The machine plane can adjust by adjustable pad, provide a gradienter for free 19.Optional printer, with a internal USB module as standard collocation to record the sterilization process

Fast setting chromaticalginate with tropical flavour Indicated for removable prothesies, study models, antagonists in fixed and removable prostheses Advantages Fast water absorption Easy raxing Homogenous mass, smooth, compact surfaces Long impression storage

Features: All the tubing is made in USA Low position of the spittoon and the seat is convenient for children Large seat and backrest help the patient feel comfortable With the backrest in the low position, the patient's head is lower than his feet Double bottles, one for the clean water, the other one for sterilization Backrest and its base with emergency stop function Anti-retraction valves to prevent cross contamination Flush system

Meeting to EN13060 European standard With pre-post vacuum Quick cycle only 10-12min LED display User friendly interface Double locking system Easily accessible water tank 2 trays, max 5 optional Multiple languages Power: 1500W Size: 414*365*530mm Tray size: 147*265mm Cavity size: Φ170x320mm 1.Microcomputer control system for automatic check; 2.With precise control, the temperature can be controlled within ± 0.5 during sterilizing 3.Friendly operation interface, simply and easy 4.B&D test, vacuum test, convenient for machine behave test 5.Automatical record of the time of sterilization beginning &end. Clean the inner pipe automatically for avoiding jam after every 6.100 times of cycles. 6.The dry time is adjustable according to your will 7.The machine is dual-purpose, not only for instruments,but also for cotton, on dry condition 8.With a LED display 9.Adjustable date&time&language mode according to your will 10.Opened reservoir, convenient for cleaning, avoiding chloramphenicol alive 11.Water quality sensor can test the quality of distilled water, reduce the failure rate 12.One-piece chamber is made of imported 304 stainless steel 13.Safety valve ensure the chamber can release the pressure safely at emergency 14.Double doors locking-system, mechanical lock with electrical lock,the machine can't open until the pressure turn 0 15.Multi-safety protection system, which can ensure the safety of the operator 16.Air-conditional heat removal system, prevent the machine from over-heating 17.Adopt the ABS plastic, whole model produce 18.The machine plane can adjust by adjustable pad, provide a gradienter for free 19.Optional printer, with a internal USB module as standard collocation to record the sterilization process

Length200mm,width 10mm Power:400W Voltage:220VAC 50Hz Movable cycloid bar of package Easy fitting suitable page sterilized of multi size(50mm/70mm/100mm) Closed seal area of electro heating Adjustable seal temperature Equipped with paper knife of double edges Stainless steel base with aluminum roll holder. Qualified plastic cover, which can prevent from eroding and easy to be cleaned. Automatically alarm when wrong operation occurs or found broken spare parts. Automatic thermostat which leads to a longer service life.

This sterilizer is a safe and reliable fast desktop sterilizer equipment that adopts automatic control. Adopt European CLASS B standard, beautiful and exquisite appearance, fully comply with EN13060 European standard. It has high performance, high reliability and high safety. It provides rapid sterilization for items that are resistant to saturated steam, such as surgery, dentistry, ophthalmology, glass equipment, medicines, culture media and fabric accessories, and food. High-quality stainless steel liner, sealed cover Microcomputer control Pressure safety interlock device, high safety factor BD test, HELIX test, vacuum test LCD liquid crystal display, touch device Built-in steam generator to quickly provide saturated steam European class B Standard More faster sterilization speed 2 vacuum pumps with ULVAC brand 10 programs USB port Printer built-in Chamber: Φ247mmX450mm Power:2000W

Fast setting chromaticalginate with tropical flavour Indicated for removable prothesies, study models, antagonists in fixed and removable prostheses Advantages Fast water absorption Easy raxing Homogenous mass, smooth, compact surfaces Long impression storage