Products

Using the international advanced technology,efficient integrated design,high efficiency,low radiation. Using microcomputer intelligent control,not only remote controlled exposure,but more powerful function of low voltage alarm and high voltage protection. Micro focus technology,much more clear image and accurate diagnosis. The base has two modes of mobile and fixed ,pneumatic lift  soat ensures more convenient for dentist and more comfortable for patient. Can use lightroom dental film,imaging in one minute,maximum convenient dentist to diagnose. Can connect to dental digital imaging system,that is indispensable for clinicians to diagnose and root canal filling. Chip Type: CMOS APS External Dim (mm): Size 1.0 (Child/woman): 26.1*36.8 Size 1.5 (adult): 29.2*38.7 Active Area: Size 1.0 (Child/woman): 31.0*20.0 Size 1.5 (adult): 33.0*24.0 Image Pixel Size (um): 35 Active Pixels Size: 0.6mega Resolution (lp/mm)/Theoretical Heoretical: <20 Measured: <10 Dimension: N.W.: 1kg G.W.: 1.2kg Size: 27*21*8cm

This type of Dental workstation widely adopts some famous dental technicians' advice both at home and abroad.The main material consists of cold-rolled stamping, die-casting aluminium alloy and extrusions.Through 3D modeling design, and by laser cutting machine,CNC bending machine, automatic welding machine and other modern equipment precision machining.Surface material can be made by squeezed high-density fireproof board, or stainless steel, or man-made marble.Selves on the desk are all made by aluminium alloy, which make the selves elegant and durable.The work light is combined by sun-light source and 5- inch 300-degree magnifier.Elbow guard surface is covered by elastomer material which makes the elbow more comfortable.The elbow working space can be adjusted in two levels between standard (40cm) and widen (48cm).Hand Gurad Layer Board adjustable any 5-20angle range.Self-reset air gun is well designed with good texture.The independent suction device also supports central vacuuming system which has strong power and low noise.The height of this desk can be adjusted between 80cm and 85cm.The four corners can be fine-tuned according to the ground.The delicate appearance air gun can reset automatic. The workstation configures low noise and suction power dust exhaust apparatus, also it support central dust collection system concentrated dust collection.Embedded integrated electrical control box is easy to fix and replace.This control box can control all of the electrical circuit, at the same time, based on this control box and from the digital window; workers can check the vacuum dust collection system of the motor run time.The standard configuration USB interface can support 2A 12V weak power.The suction nozzle assembly has two accessories can choose.One is Fan toughened glass block dust board another one is LED lamp ring (built-5 inch magnifying glass/5 inch flat lens). The workstation has a unique hidden layer, which is neat and easy to use, and can be used in the actual use of all pipelines, as well as vacuum cleaners are hidden in the sandwich.Between each workstations can connect seamlessly.There are supplementary dust collection components which are allocated randomly.The operation desk can be cleaned just by buckling the assistant suction device on the nozzle.

Power Supply: 220V/110V 50/60Hz Power Consumption: 150W Motor Rotational Speed: 2,800rpm Grinding Head: C 625 M06 Optional Accessories: Dust Extractor (Reference AX-SUPER800, AX-MX800) N.W./G.W.: 21/23kg Size: 51*40*50cm

Quickly conduct heat out and blow it into the nearby air 1. Please wipe the outside of the body gently with a neutral detergent and keep it dry 2 The inside of the stainless steel tank needs to be cleaned with clean water every day for impurities settled after distillation, monthly (it depends on the amount of dirt in the tank). Note (hot) water into the stainless steel tank to slightly higher than the dirt performance. Pour one to four tablespoons (depending on how dirty the tank is) of cleaning agent into the tank. Do not close the cover, plug in the main power supply, press the start button, and heat the stainless steel tank. #15. Pour out the water after 30 minutes and rinse the inside with clean water. If all the dirt cannot be removed at one time, the above actions can be repeated. The remaining dirt will not affect your health, please rest assured to use. 3. The water storage bucket can be disinfected and cleaned with hot (hot) water and will not deform. 4. In order to make the homemade distilled water more mellow, you can replace a water outlet every 2-3 months.

1.Quiet and smooth two way with super soft medical ultra leather hydraulic patient chair 2. Articulating dual axis headrest 3.Four operator programmable position 4.Swing down armrest 5.LCD screens display aluminum casting base instrument tray with touch pad 6.Three handpiece automatic control& 2pcs three way syringe 7.Three axis led operating light with sensor 8.Electric controlled timed bowl rinse and cup filler 9.Swing arm ceramic bowl with touch button water activator 10.Sidebox with self-contained water system 11.Telescoping assistant arm with touch pad 12.Autoclavable standard HVE leaver valve with tubing 13.Autoclavable saliva ejector leaver valve with tubing 14.Asepsis three-way air/water syringe with tubing 15.Memory setting function foot control 16.Deluxe Dentist stool 1.Cast aluminum with steel reinforcement 2.LCD screens displays air/water pressures, water temperature,self contained clean water system / city water option. Along with date, time, and alarm setting 3.Synchronized back&seat movement 4. Safety emergency stop control device 5. Trendelenburg position 6. 30° left to right seat rotation 7. System anti-retraction valves to prevent cross contamination 8. Load capacity 250Kg 3-axis LED light with sensor. LED direct-injection dental lamp with universal rotating joint adjustment, switch with sensor and induction light intensity adjustment. Spittoon flushing and mouthwash cup water injection mode using 12V solenoid valve control, flow control accuracy. Intelligent memory set control, arbitrary adjustment of water cup and spittoon flush way and time. The instrument tray is connected with the lifting arm with a pneumatic self-locking position device. The shell is die-cast by aluminum alloy, and the horizontal alignment of the instrument tray can be adjusted arbitrarily. Equipped with LCD electronic screen, display information including water/air pressure, water temperature, cooling water conversion and working time, etc. Memory setting function foot control

Designed for the simulation of clinical education Designed for the simulation of clinical education, help students develop the right operating posture in the pre-clinical study, master ergonomic skills and then smoothly transition to real clinical treatment. With JPS FT-III dental teaching simulation system, students learn right from the start, under more realistic conditions: •In a pre-clinical environment, students learn using standard treatment centre components and do not have to adjust to new equipment later in their education •Optimum treatment ergonomics with height-adjustable dentist and assistant elements •Best protection of student health, with integrated, continuous and intensive disinfection of internal water-lines •New design: dual instrument tray, makes four-hand operation come true . •Operation light: the brightness is adjustable. With different type teeth mode Manikin comes with magnetic articulator , it is compatible with different type teeth model Imitate real clinical environment. Electric motors drive the movement of the manikin----imitate real clinical environment. Easy to clean Auto reset function of manikin system- provide the cleanliness and utilization of space Artificial marble top is easy to clean Two preset position keys Two preset position keys : S1 , S2 Automatic reset key : S0 Can be set highest and lowest position With emergency stop function Hommization Suction water bottle Suction water bottle is designed to be removed and installed very easily ,improve study efficiency a lot. JPS Dental simulation experts, reliable partners, sincere forever！

This portable dental X-ray unit is high frequency machine. The body is small, light weight and nearly no radiation. It has excellent image quality, portable storage, save more space. It uses high frequency and DC international power supply. All of the components installed in the central PC board concentrated. Shock, set-up, electron tubes, all of them are insulation vacuum, sealed stereotype protection. There are also manual buttons installed on the surface of shell, as well as batteries and charges. This unit mainly suitable for oral pre-treatment for learning internal organizational structure, root depth and so on, is indispensable in daily life clinic equipment, especially for dental implant surgery. It also can connect with sensor, is great convenience. Checking and Security !  Caution: Please learn relative security measures and functions given in the file or on the unit. * Using the products after checking battery and the location of the device, make sure that is operates properly. * Checking all the power cords whether correctly and connected formally. * Operating the device in the designated order. * Recheck the cone connect with the patient’s face closely. * Keep the device and the cone clean. * Please use or operate the device and parts after taking a necessary periodic inspection. * If you discover some difference in the sensor images even if you inspected its x-ray exposure time in the same way as before, then it means that the radiation of x-ray is abnormal, you must stop using it immediately and allow it to be inspected. * Don’t use or store near the place which is possible to fire. * Don’t use or store where air pressure or temperature or moisture exceeds range. * Keep good ventilation and avoid direct sunlight, protect against the eroding of dust and corrosive air. * Don’t use or store near to chemicals or combustible gas. Tube voltage 60KV Tube current 1.5mA Exposure time 0.1--2.0s Frequency 30KHz Rate power 60VA Distance from skin to cone 130mm Tube focus 0.3mm*0.3mm Battery DC14.8V  6400mAh Charger input voltage AC100V-240V±10% Output voltage DC16.8V Ambient temperature 5℃~40℃ Relative temperature <75%RH Net weight 2.5KG Gross weight 3.5KG Size(mm) 138*165*185 Package size(mm) 365*330*265

Pano: •Provide you with high diagnosis accuracy and better treatment on diseasesof the full dentiton and jaw. •Easy to get HD panoramic images by building a perfect tomographic track combined with the motion of the X, Y and Sita axis. CT : •A versatile helper to clearly display patient's anatomical structure with flexible FOV. •lntelligent imaging technology makes free observation from angle realizable. •Accurate measurement of the distance, area,volume and outline contour makes the one-key panoramic image obtained from the 3D image simple and easy. Cephalometric •Othodontic specialist's best choice making orthodontic treatment and maxillofacial surgery efficient and accurate. •Low-dose radiation and high gray realized by dual-level alignment adjustment to provide you with HD cephalometic images. •Unique algorithms of HRPBR image reconstruction and WE image processing •Leading technology intelligently generating HD pano images to provide with more clinical details and high diagnosis accuracy •Intelligent de-noise algorithm significantly improving image's resolution b yreducing image's noise and distortion •Variety of shooting modes: HD scanning, SD scanning, root canal scanning  •Special-designed algorithm of mental artifact removal providing with high quality images by removing artifacts caused by absorbent materials •CUDA high-speed image reconstruction

The ultrasonic cleaner is a microprocessor-controlled device that uses ultrasonic or high frequency sound waves to clean jewelry and other delicate items. Ultrasonic cleaning is based on the cavitation effect caused by high frequency ultrasonic wave vibration signals in fluid. Microscopic bubbles that expand and rapidly collapse cause cavitation, which creates an effective cleaning action on the surface of object being cleaned. Additionally, the bubbles are small enough to penetrate even microscopic crevices, cleaning them thoroughly and consistently.  High efficiency saves cleaning solvent, thermal energy, work place and labor!  Three sets of built-in powerful transducers can strengthen the ultrasonic power and make superior cleaning outcome. It is utilization of digital program in ultrasonic cleaner to control the unit, according to the quantity and condition of the items to be cleaned to choose a working cycle time. As a result, it is more convenient and efficient than hand wash, steam cleaners, high pressure water jet cleaning or other machines. Advanced Brushed Stainless Steel Cleaning Tank to avoid corrosion water stain and keep the tank looking always new. (In comparison, the common stainless steel cleaning tanks will be dirty yellow corrosion water stain on the surface after a long time of using, and it's hard to be removed.) Power Voltage: AC220V/50Hz or AC110V/60Hz Fuse Tube: 2A, 250V Ultrasonic Power: 120W Heating Power: 150W Time: 1~99Minutes Temperature:20℃ ~ 80℃ Dimension of Cleaning Slot: 24*14*15cm Professional Use: Medical and Dental Clinics, Tattoo Shops, Scientific Labs and Golf Clubs. Jewelers, Opticians, Watchmakers, Antique Dealers and Electronics Workshops etc.

Quickly conduct heat out and blow it into the nearby air 1. Please wipe the outside of the body gently with a neutral detergent and keep it dry 2 The inside of the stainless steel tank needs to be cleaned with clean water every day for impurities settled after distillation, monthly (it depends on the amount of dirt in the tank). Note (hot) water into the stainless steel tank to slightly higher than the dirt performance. Pour one to four tablespoons (depending on how dirty the tank is) of cleaning agent into the tank. Do not close the cover, plug in the main power supply, press the start button, and heat the stainless steel tank. #15. Pour out the water after 30 minutes and rinse the inside with clean water. If all the dirt cannot be removed at one time, the above actions can be repeated. The remaining dirt will not affect your health, please rest assured to use. 3. The water storage bucket can be disinfected and cleaned with hot (hot) water and will not deform. 4. In order to make the homemade distilled water more mellow, you can replace a water outlet every 2-3 months.

Lamp height: 41' to 69' (104.1cm to 175.3cm) Boom length: 41' (104.1cm) Weight: 9.45lbs(4.29kg) AC Input: 100-240V 0.16A 50-60Hz Consumption: 10W max Duty Cycle: Continuous LED life: 10,000 Hrs minimum Lumen maintenance>70% @30,000Hrs Light distribution: 10 different aperture sizes Nominal Working Distance: 16''(40.6cm) w/large aperture, or 36' (91.4cm) w/small aperture Light source: LED emitter 1. Portable LED operatory light with tripod base to supply convenience and stability. 2. It can be folded neatly into the carrying bag. 3. Flexible gooseneck to meet different working distance. 4. Light weight construction and portable. 5. Bright LED light. 6. Long service life.