Products

This portable dental X-ray unit is high frequency machine. The body is small, light weight and nearly no radiation. It has excellent image quality, portable storage, save more space. It uses high frequency and DC international power supply. All of the components installed in the central PC board concentrated. Shock, set-up, electron tubes, all of them are insulation vacuum, sealed stereotype protection. There are also manual buttons installed on the surface of shell, as well as batteries and charges. This unit mainly suitable for oral pre-treatment for learning internal organizational structure, root depth and so on, is indispensable in daily life clinic equipment, especially for dental implant surgery. It also can connect with sensor, is great convenience. Checking and Security !  Caution: Please learn relative security measures and functions given in the file or on the unit. * Using the products after checking battery and the location of the device, make sure that is operates properly. * Checking all the power cords whether correctly and connected formally. * Operating the device in the designated order. * Recheck the cone connect with the patient’s face closely. * Keep the device and the cone clean. * Please use or operate the device and parts after taking a necessary periodic inspection. * If you discover some difference in the sensor images even if you inspected its x-ray exposure time in the same way as before, then it means that the radiation of x-ray is abnormal, you must stop using it immediately and allow it to be inspected. * Don’t use or store near the place which is possible to fire. * Don’t use or store where air pressure or temperature or moisture exceeds range. * Keep good ventilation and avoid direct sunlight, protect against the eroding of dust and corrosive air. * Don’t use or store near to chemicals or combustible gas. Tube voltage 60KV Tube current 1.5mA Exposure time 0.1--2.0s Frequency 30KHz Rate power 60VA Distance from skin to cone 130mm Tube focus 0.3mm*0.3mm Battery DC14.8V  6400mAh Charger input voltage AC100V-240V±10% Output voltage DC16.8V Ambient temperature 5℃~40℃ Relative temperature <75%RH Net weight 2.5KG Gross weight 3.5KG Size(mm) 138*165*185 Package size(mm) 365*330*265

When dentists prepare the teeth, a large number of bacterium-carrying airflow (atomized state) ejected from patients is directly sprayed to the face of dentists, and spreads to the whole oral examination room, polluting the environment;According to statistics, dentists are the most susceptible of infection among all practicing physicians;In the course of treatment, inevitably there are a lot of water into the patient's mouth (turbine handpiece cooling water and clean the wound clean water, etc.), and the patient's own secretion, will stimulate the patient's nerve, cause swallowing reaction, such as cannot be sustained and effective drainage, will stop treatment;The vacuum suction of the traditional dental unit adopts the principle of "jet flow". The compressed air or water is discharged in large quantities in the main pipe, so that the negative pressure formed by vacuum in the auxiliary pipe is used to suck the fluid in the patient's mouth.If the compressed air is used as power, it will cause the continuous operation of the compressor and reduce the service life of the compressor.If urban tap water is used as power, water resources will be greatly lost, energy will be wasted and operating costs of clinics will be increased. The HVS series dental electric suction system vacuum pump manufactured by our company adopts the structure form of impeller directly mounted on the motor rotor, which is completely contactless compression. Because the pump bearing is installed outside the compression chamber, it can ensure the reliable work of the machine even under the maximum pressure difference. 1.Suction & Exhausting In Same Time, No Suction Blind Spot. 2.Last Long & Comfort Suction Power.Protect Working Conditions For Both Doctors & Patients. 3.Suction delay function ensures no residue in the pipeline 4.Good heat dissipation performance, stable and large suction, no waste water and no bacteria. 5.Less Space Needed，Less Consumption&Less Noise. 6.Easy Maintenance & Longer Use Life. 7.Waste water is disinfected, environment friendly. 8.Inverter system can be added,timely adjust the working frequency, no water circulation, saving energy and reducing costs 9.Reduce the gas consumption in the clinic..Prolongs the service life of the compressor and reduces the amount of configuration of the compressor MODEL VOLTAGE Suction capacity Max negative pressure JPCX-05 380V 1500L/min ≤-15KPA Rated Power Noise level Weight Measurement 1.9kW(inverter) 76dB(A) 104kg 80*60*97cm Model Voltage (V/Hz) Rated Power (KW) Vacuum (KPa) Max Suction (m³/min) JPCX-01 220/50 0.75 ≤-12 0.3 380/50 JPCX-02 220/50 1.3 ≤-13 0.9 380/50 JPCX-03 220/50 1.5 ≤-14 1.5 380/50 JPCX-05 220/50 1.9 ≤-15 1.5 380/50 JPCX-07 380/50 2.5 ≤-15 2.1 JPCX-10 380/50 3.3 ≤-16 3.0  

Length200mm,width 10mm Power:400W Voltage:220VAC 50Hz Movable cycloid bar of package Easy fitting suitable page sterilized of multi size(50mm/70mm/100mm) Closed seal area of electro heating Adjustable seal temperature Equipped with paper knife of double edges Stainless steel base with aluminum roll holder. Qualified plastic cover, which can prevent from eroding and easy to be cleaned. Automatically alarm when wrong operation occurs or found broken spare parts. Automatic thermostat which leads to a longer service life.

Specification: Seal speed: 10±0.5m/min      Power: 500W Seal width: 12mm                  Weight: 18kg Seal margin: 0-35mm            Temperature range: 60-220℃ Temperature error ≤1%          Dimension: 560 x260x 220mm AC Power According to customer requirements 1.7 Color capacity touch screen, with Android operation system graphical user interface, built-in clock, and parameter scan be set up and stored; 2.In-built color touch control screen can be used without computer connection to set up or change the operation parameters, with English input methods or using optional scanning gun; 3.8 million records of sealing and printing information can be inquired by printing parameters database or you can use wireless router to adjust them; 4.Safe operation: If the sealing temperature and sealing pressure exceeds setting range, the machine will automatically stop working, which effectively guarantees the seal quality and safety; 5.Printing system can print medical device labels, marks and information; Printing of sterilization date,expiry date, lot No., Sterilizer No., operators and department conforms to relevant standard. 6.With in-built printer font width, space are adjustable, convenient for more information to be printed on narrow pouches; print function can be closed with one-key or partially activated;

Using the international advanced technology,efficient integrated design,high efficiency,low radiation. Using microcomputer intelligent control,not only remote controlled exposure,but more powerful function of low voltage alarm and high voltage protection. Micro focus technology,much more clear image and accurate diagnosis. The base has two modes of mobile and fixed ,pneumatic lift  soat ensures more convenient for dentist and more comfortable for patient. Can use lightroom dental film,imaging in one minute,maximum convenient dentist to diagnose. Can connect to dental digital imaging system,that is indispensable for clinicians to diagnose and root canal filling. Chip Type: CMOS APS External Dim (mm): Size 1.0 (Child/woman): 26.1*36.8 Size 1.5 (adult): 29.2*38.7 Active Area: Size 1.0 (Child/woman): 31.0*20.0 Size 1.5 (adult): 33.0*24.0 Image Pixel Size (um): 35 Active Pixels Size: 0.6mega Resolution (lp/mm)/Theoretical Heoretical: <20 Measured: <10 Dimension: N.W.: 1kg G.W.: 1.2kg Size: 27*21*8cm

Meeting to EN13060 European standard With pre-post vacuum Quick cycle only 10-12min LED display User friendly interface Double locking system Easily accessible water tank 2 trays, max 5 optional Multiple languages Power: 1500W Size: 414*365*530mm Tray size: 147*265mm Cavity size: Φ170x320mm 1.Microcomputer control system for automatic check; 2.With precise control, the temperature can be controlled within ± 0.5 during sterilizing 3.Friendly operation interface, simply and easy 4.B&D test, vacuum test, convenient for machine behave test 5.Automatical record of the time of sterilization beginning &end. Clean the inner pipe automatically for avoiding jam after every 6.100 times of cycles. 6.The dry time is adjustable according to your will 7.The machine is dual-purpose, not only for instruments,but also for cotton, on dry condition 8.With a LED display 9.Adjustable date&time&language mode according to your will 10.Opened reservoir, convenient for cleaning, avoiding chloramphenicol alive 11.Water quality sensor can test the quality of distilled water, reduce the failure rate 12.One-piece chamber is made of imported 304 stainless steel 13.Safety valve ensure the chamber can release the pressure safely at emergency 14.Double doors locking-system, mechanical lock with electrical lock,the machine can't open until the pressure turn 0 15.Multi-safety protection system, which can ensure the safety of the operator 16.Air-conditional heat removal system, prevent the machine from over-heating 17.Adopt the ABS plastic, whole model produce 18.The machine plane can adjust by adjustable pad, provide a gradienter for free 19.Optional printer, with a internal USB module as standard collocation to record the sterilization process

Meeting to EN13060 European standard With pre-post vacuum Quick cycle only 10-12min LED display User friendly interface Double locking system Easily accessible water tank 2 trays, max 5 optional Multiple languages Power: 1500W Size: 414*365*530mm Tray size: 147*265mm Cavity size: Φ170x320mm 1.Microcomputer control system for automatic check; 2.With precise control, the temperature can be controlled within ± 0.5 during sterilizing 3.Friendly operation interface, simply and easy 4.B&D test, vacuum test, convenient for machine behave test 5.Automatical record of the time of sterilization beginning &end. Clean the inner pipe automatically for avoiding jam after every 6.100 times of cycles. 6.The dry time is adjustable according to your will 7.The machine is dual-purpose, not only for instruments,but also for cotton, on dry condition 8.With a LED display 9.Adjustable date&time&language mode according to your will 10.Opened reservoir, convenient for cleaning, avoiding chloramphenicol alive 11.Water quality sensor can test the quality of distilled water, reduce the failure rate 12.One-piece chamber is made of imported 304 stainless steel 13.Safety valve ensure the chamber can release the pressure safely at emergency 14.Double doors locking-system, mechanical lock with electrical lock,the machine can't open until the pressure turn 0 15.Multi-safety protection system, which can ensure the safety of the operator 16.Air-conditional heat removal system, prevent the machine from over-heating 17.Adopt the ABS plastic, whole model produce 18.The machine plane can adjust by adjustable pad, provide a gradienter for free 19.Optional printer, with a internal USB module as standard collocation to record the sterilization process

Using the international advanced technology,efficient integrated design,high efficiency,low radiation. Using microcomputer intelligent control,not only remote controlled exposure,but more powerful function of low voltage alarm and high voltage protection. Micro focus technology,much more clear image and accurate diagnosis. The base has two modes of mobile and fixed ,pneumatic lift  soat ensures more convenient for dentist and more comfortable for patient. Can use lightroom dental film,imaging in one minute,maximum convenient dentist to diagnose. Can connect to dental digital imaging system,that is indispensable for clinicians to diagnose and root canal filling. Chip Type: CMOS APS External Dim (mm): Size 1.0 (Child/woman): 26.1*36.8 Size 1.5 (adult): 29.2*38.7 Active Area: Size 1.0 (Child/woman): 31.0*20.0 Size 1.5 (adult): 33.0*24.0 Image Pixel Size (um): 35 Active Pixels Size: 0.6mega Resolution (lp/mm)/Theoretical Heoretical: <20 Measured: <10 Dimension: N.W.: 1kg G.W.: 1.2kg Size: 27*21*8cm

This portable dental X-ray unit is high frequency machine. The body is small, light weight and nearly no radiation. It has excellent image quality, portable storage, save more space. It uses high frequency and DC international power supply. All of the components installed in the central PC board concentrated. Shock, set-up, electron tubes, all of them are insulation vacuum, sealed stereotype protection. There are also manual buttons installed on the surface of shell, as well as batteries and charges. This unit mainly suitable for oral pre-treatment for learning internal organizational structure, root depth and so on, is indispensable in daily life clinic equipment, especially for dental implant surgery. It also can connect with sensor, is great convenience. Checking and Security !  Caution: Please learn relative security measures and functions given in the file or on the unit. * Using the products after checking battery and the location of the device, make sure that is operates properly. * Checking all the power cords whether correctly and connected formally. * Operating the device in the designated order. * Recheck the cone connect with the patient’s face closely. * Keep the device and the cone clean. * Please use or operate the device and parts after taking a necessary periodic inspection. * If you discover some difference in the sensor images even if you inspected its x-ray exposure time in the same way as before, then it means that the radiation of x-ray is abnormal, you must stop using it immediately and allow it to be inspected. * Don’t use or store near the place which is possible to fire. * Don’t use or store where air pressure or temperature or moisture exceeds range. * Keep good ventilation and avoid direct sunlight, protect against the eroding of dust and corrosive air. * Don’t use or store near to chemicals or combustible gas. Tube voltage 60KV Tube current 1.5mA Exposure time 0.1--2.0s Frequency 30KHz Rate power 60VA Distance from skin to cone 130mm Tube focus 0.3mm*0.3mm Battery DC14.8V  6400mAh Charger input voltage AC100V-240V±10% Output voltage DC16.8V Ambient temperature 5℃~40℃ Relative temperature <75%RH Net weight 2.5KG Gross weight 3.5KG Size(mm) 138*165*185 Package size(mm) 365*330*265

Pano: •Provide you with high diagnosis accuracy and better treatment on diseasesof the full dentiton and jaw. •Easy to get HD panoramic images by building a perfect tomographic track combined with the motion of the X, Y and Sita axis. CT : •A versatile helper to clearly display patient's anatomical structure with flexible FOV. •lntelligent imaging technology makes free observation from angle realizable. •Accurate measurement of the distance, area,volume and outline contour makes the one-key panoramic image obtained from the 3D image simple and easy. Cephalometric •Othodontic specialist's best choice making orthodontic treatment and maxillofacial surgery efficient and accurate. •Low-dose radiation and high gray realized by dual-level alignment adjustment to provide you with HD cephalometic images. •Unique algorithms of HRPBR image reconstruction and WE image processing •Leading technology intelligently generating HD pano images to provide with more clinical details and high diagnosis accuracy •Intelligent de-noise algorithm significantly improving image's resolution b yreducing image's noise and distortion •Variety of shooting modes: HD scanning, SD scanning, root canal scanning  •Special-designed algorithm of mental artifact removal providing with high quality images by removing artifacts caused by absorbent materials •CUDA high-speed image reconstruction

1.Quiet and smooth two way with super soft medical ultra leather hydraulic patient chair 2. Articulating dual axis headrest 3.Four operator programmable position 4.Swing down armrest  5.LCD screens display aluminum casting base instrument tray with touch pad   6.Three handpiece automatic control& 2pcs three way syringe 7.Three axis led operating light with sensor  8.Electric controlled timed bowl rinse and cup filler  9.Swing arm ceramic bowl with touch button water activator  10.Sidebox with self-contained water system   11.Telescoping assistant arm with touch pad  12.Autoclavable standard HVE leaver valve with tubing  13.Autoclavable saliva ejector leaver valve with tubing 14.Asepsis three-way air/water syringe with tubing  15.Memory setting function foot control 16.Deluxe Dentist stool 1.Cast aluminum with steel reinforcement 2.LCD screens displays air/water pressures, water temperature,self contained clean water system / city water option. Along with date, time, and alarm setting 3.Synchronized back&seat movement  4. Safety emergency stop control device  5. Trendelenburg position 6. 30° left to right seat rotation 7. System anti-retraction valves to prevent cross contamination 8. Load capacity 250Kg 3-axis LED light with sensor. LED direct-injection dental lamp with universal rotating joint adjustment, switch with sensor and induction light intensity adjustment. Spittoon flushing and mouthwash cup water injection mode using 12V solenoid valve control, flow control accuracy. Intelligent memory set control, arbitrary adjustment of water cup and spittoon flush way and time. The instrument tray is connected with the lifting arm with a pneumatic self-locking position device. The shell is die-cast by aluminum alloy, and the horizontal alignment of the instrument tray can be adjusted arbitrarily. Equipped with LCD electronic screen, display information including water/air pressure, water temperature, cooling water conversion and working time, etc. Memory setting function foot control