Products

The ultrasonic cleaner is a microprocessor-controlled device that uses ultrasonic or high frequency sound waves to clean jewelry and other delicate items. Ultrasonic cleaning is based on the cavitation effect caused by high frequency ultrasonic wave vibration signals in fluid. Microscopic bubbles that expand and rapidly collapse cause cavitation, which creates an effective cleaning action on the surface of object being cleaned. Additionally, the bubbles are small enough to penetrate even microscopic crevices, cleaning them thoroughly and consistently.  High efficiency saves cleaning solvent, thermal energy, work place and labor!  Three sets of built-in powerful transducers can strengthen the ultrasonic power and make superior cleaning outcome. It is utilization of digital program in ultrasonic cleaner to control the unit, according to the quantity and condition of the items to be cleaned to choose a working cycle time. As a result, it is more convenient and efficient than hand wash, steam cleaners, high pressure water jet cleaning or other machines. Advanced Brushed Stainless Steel Cleaning Tank to avoid corrosion water stain and keep the tank looking always new. (In comparison, the common stainless steel cleaning tanks will be dirty yellow corrosion water stain on the surface after a long time of using, and it's hard to be removed.) Power Voltage: AC220V/50Hz or AC110V/60Hz Fuse Tube: 2A, 250V Ultrasonic Power: 120W Heating Power: 150W Time: 1~99Minutes Temperature:20℃ ~ 80℃ Dimension of Cleaning Slot: 24*14*15cm Professional Use: Medical and Dental Clinics, Tattoo Shops, Scientific Labs and Golf Clubs. Jewelers, Opticians, Watchmakers, Antique Dealers and Electronics Workshops etc.

European class B standard More faster sterilization speed 2 vacuum pumps with ULVAC brand 10 programs USB port Printer built-in Chamber: Φ 247mmX350mm Power:1800W 1. It can maintain two high-speed handpieces and one low-speed handpiece at the same time. 2. Suitable for different brands handpieces. 3. Sealed door can effectively reduce the spread of oil mist to a minimum and ensure a clean working environment. 4. Air button can remove excess residual oil in the handpiece after the oil filling and cleaning.

The production of medical cabinets and laboratory cabinets all use nano-coated stainless steel plates and color stainless steel plates as raw materials The countertop adopts the sink and the stainless steel plate conjoined countertop, and all the stainless steel integrated cabinets have no welding spot during the production process. The instrument tray is made of ABS food-grade plastic, white, smooth and oil-resistant. It can be taken out and cleaned at any time. It can used be stored separately. * 10W Wireless charger + USB 5.0V charge hole * It supports apple and Android wireless charging phones, which can provide sufficient power for your phone at any time.The power supply system of this cabinet can supply power for 5 devices at the same time. * Double-layer silent wheel with brake * It adopts 3-inch (100mm height, 70mm diameter) double-disc bearing casters specially designed for hospitals. The surface is covered with polyurethane, durable and quiet, which does not hurt the floor. All four wheels are equipped with brakes, which can be locked at any time.When moving, keep stable and do not drift, four wheel load can reach more than 150KG. * 4.8L Hanging trash can * 8L hanging trash can can be randomly placed on both sides or back to improve the operation efficiency of doctors. * Transparent acrylic label card * Each drawer is equipped with acrylic label card and 5-color coated paper writable label, which is easy to insert and take, allowing you and your assistant to quickly identify the contents of the drawer and improve work efficiency. * it can use for hospital, stomatology department, clinic, beauty salon, public cashier assistant storage, studio, home creation space, school, government offices. * The main body is made of E1 grade wood-based panel with 18.8mm thick crystal surface (high brightness plexiglass finish), with high strength, waterproof dip, anti - distortion characteristics. * Space aluminum sand silver pull handle - long service life and High strength, safe and beautiful.

1.Quiet and smooth two way with super soft medical ultra leather hydraulic patient chair 2. Articulating dual axis headrest 3.Four operator programmable position 4.Swing down armrest 5.LCD screens display aluminum casting base instrument tray with touch pad 6.Three handpiece automatic control& 2pcs three way syringe 7.Three axis led operating light with sensor 8.Electric controlled timed bowl rinse and cup filler 9.Swing arm ceramic bowl with touch button water activator 10.Sidebox with self-contained water system 11.Telescoping assistant arm with touch pad 12.Autoclavable standard HVE leaver valve with tubing 13.Autoclavable saliva ejector leaver valve with tubing 14.Asepsis three-way air/water syringe with tubing 15.Memory setting function foot control 16.Deluxe Dentist stool 1.Cast aluminum with steel reinforcement 2.LCD screens displays air/water pressures, water temperature,self contained clean water system / city water option. Along with date, time, and alarm setting 3.Synchronized back&seat movement 4. Safety emergency stop control device 5. Trendelenburg position 6. 30° left to right seat rotation 7. System anti-retraction valves to prevent cross contamination 8. Load capacity 250Kg 3-axis LED light with sensor. LED direct-injection dental lamp with universal rotating joint adjustment, switch with sensor and induction light intensity adjustment. Spittoon flushing and mouthwash cup water injection mode using 12V solenoid valve control, flow control accuracy. Intelligent memory set control, arbitrary adjustment of water cup and spittoon flush way and time. The instrument tray is connected with the lifting arm with a pneumatic self-locking position device. The shell is die-cast by aluminum alloy, and the horizontal alignment of the instrument tray can be adjusted arbitrarily. Equipped with LCD electronic screen, display information including water/air pressure, water temperature, cooling water conversion and working time, etc. Memory setting function foot control

This type of Dental workstation widely adopts some famous dental technicians' advice both at home and abroad.The main material consists of cold-rolled stamping, die-casting aluminium alloy and extrusions.Through 3D modeling design, and by laser cutting machine,CNC bending machine, automatic welding machine and other modern equipment precision machining.Surface material can be made by squeezed high-density fireproof board, or stainless steel, or man-made marble.Selves on the desk are all made by aluminium alloy, which make the selves elegant and durable.The work light is combined by sun-light source and 5- inch 300-degree magnifier.Elbow guard surface is covered by elastomer material which makes the elbow more comfortable.The elbow working space can be adjusted in two levels between standard (40cm) and widen (48cm).Hand Gurad Layer Board adjustable any 5-20angle range.Self-reset air gun is well designed with good texture.The independent suction device also supports central vacuuming system which has strong power and low noise.The height of this desk can be adjusted between 80cm and 85cm.The four corners can be fine-tuned according to the ground.The delicate appearance air gun can reset automatic. The workstation configures low noise and suction power dust exhaust apparatus, also it support central dust collection system concentrated dust collection.Embedded integrated electrical control box is easy to fix and replace.This control box can control all of the electrical circuit, at the same time, based on this control box and from the digital window; workers can check the vacuum dust collection system of the motor run time.The standard configuration USB interface can support 2A 12V weak power.The suction nozzle assembly has two accessories can choose.One is Fan toughened glass block dust board another one is LED lamp ring (built-5 inch magnifying glass/5 inch flat lens). The workstation has a unique hidden layer, which is neat and easy to use, and can be used in the actual use of all pipelines, as well as vacuum cleaners are hidden in the sandwich.Between each workstations can connect seamlessly.There are supplementary dust collection components which are allocated randomly.The operation desk can be cleaned just by buckling the assistant suction device on the nozzle.

1 Use the intermational advanced technology 2 high-efficiency and clear imaging, low leaking radiation is only 1% of national standard 3 Light touched button, controled with microcomputer, only press one button to select the exposue parameter, cibvebuebt  fast and accurately 4 Developing in light room, image in one minute, the doctor can diagnose conveniently for maximum 5 Pneumatic up-down seat, more convenient and more comfortable 6 It is for the use of the digital imaging system of mouth Specifications Power supply: 220V±10%,50HZ,1KVA Tube voltage 70KV Tube current 8mA Focus size 0.8mm or 0.4mm(as per demand of end-user) Total filtration 2.5mmAL Exposure time 0.2-4s Leak radiation: outside one meter≦0.002mGy/h，（national standard:0.25mGy/h） Package size: 152*57*26(cm) Net weight: 57kg 1. In order to ensure safety in operation and use, good ground lead must be installed well. 2. Because small X-ray machine’s thermal capacity is limited, attention should be paid to making the machine work intermittently. 3. Only during exposure process this machine will produce X-rays. It won’t produce X-rays in power-off state, neither in power-on state as long as not in exposure. 4. If any unforeseen circumstances occur during correct use, operators should cut off the power immediately and stop using the machine. It cannot be used again until it is overhauled and qualified. 5. Before leaving the factory, each X-ray device is equipped with an additional filter plate with the following specifications: 1.0/0.5mm aluminum sheets. 6. Every time when disassembling the machine, disassemble the head first and then other parts. 8. Every time after using the machine, recover the cross arm to the highest point, and then place the machine head in an equilibrium position. 9. Every time after using, sterilize and clean beam tube end that contacts the patient with medical alcohol. 10. Clean the machine surface with a dry cloth every week and inspect whether the connectors contact well. 11. Pay attention to machine maintenance. Check whether the indicator lights, display, rotary knob, switch, and remote control work normally; whether the X-ray source modules leak oil; whether when X-ray source modules expose produces any abnormal noise; or whether fixed screws in the mechanical part loose, and the like. 13. The rated capacity of the machine is 1.1kw. Please select power supply or power grid with a power supply capacity greater than 1.5kw. If network voltage in this region is abnormal, we recommend matching 1.5KW or higher industrial voltage stabilizer, to prevent damage to the machine and reduced machine life due to abnormal voltage.

Planmeca ProMax® is a complete maxillofacial imaging system. The design and operation principles are based on the latest scientific research, technological  innovations and the most demanding needs of modern-day radiology. Advanced technology •  Autofocus positions the focal layer automatically for perfect panoramic images •  Dynamic Exposure Control (DEC) measures the patient’s radiation transparency and automatically adjusts exposure values •  Patented SCARA (Selectively Compliant Articulated Robot Arm) technology guarantees an anatomically correct imaging geometry for clear, error-free images •  Easy upgrades – add cephalostat or 3D imaging capability at any time Effortless use •  Full-view patient positioning with triple-laser patient positioning lights •  Side entry for comfortable access •  Easy-to-use graphical interface •  Versatile Planmeca Romexis® 2D imaging software •  TWAIN support and full DICOM compliance Planmeca ProMax X-ray unit provides a wide range of extraoral imaging modalities: panoramic imaging for dental arch maxillary sinus imaging temporomandibular joint imaging 2D linear tomography cephalometry  Open positioning and easy use Free view to the patient from all directions Three laser positioning laser beams Easy access also for wheelchair patients Motorized patient positioning and temple supports Autofocus feature makes the positioning of the focal layer automatically. Autofocus takes first a short, low-dose scout image for searching landmarks and calculating the focal layer with the help of a special neural network algorithm. The user can monitor the suggested focal layer adjustment both on the control panel and on the image acquisition preview. The focal layer adjustments can be amended, or the user can simply accept the adjustments and continue to the final exposure. Dynamic Exposure Control (DEC) adapts the whole imaging chain individually for each patient's physio-anatomical characteristics to produce the optimal contrast and density. Both the X-ray source and the image receptor are automatically adjusted to produce the optimum image quality. Interactive, informative and intuitive colour TFT graphic user interface (GUI) Technical factors and selected programs digitally displayed Image preview Optimised image geometry and constant magnification Optimised image geometry and constant magnification Adjustable form of focal trough Automatic compensation for the cervical vertebrae shadow Full digital control Re-programmable flash EPROM Microprocessor controlled self-diagnostic control system with clear help guiding to correct use and error messages announcing hardware or software problems Constant potential, microprocessor controlled resonance mode generator Very high operating frequency 80 – 150 kHz Maximum ripple 670 Vpp (0.4%, 84 kV) Ultra short rise time, < 3 ms Very wide exposure parameters range, 1 – 16mA / 54 – 84 kV2(5) Low patient dose Universal power input including Power Factor Corrector, mains voltage fluctuations automatically compensated Reliable mechanical construction Small size and light weight, total weight 113 kg (249 lbs) Unique 3 joint SCARA (Selectively Compliant Articulated Robot Arm) technology enables complicated movements and versatile imaging geometries, smooth and quiet micro-step motors Telescopic body column without counterweight. Maximum height adjustable. Automatic four blade primary collimator Available as wall-mounted or free standing  Imaging mode: Basic panoramic programs Horizontal and Vertical segmenting Bitewing panoramic program Tomography: Digital tomography, Transtomography Child mode in all imaging programs to reduce the dose and to optimise the imaging geometry Cephalostat Planmeca ProCeph “one shot” cephalostat Digital Ceph Dimax4 (2 fixed sensors or 1 movable sensor) DEC (Dynamic Exposure Control): Panoramic DEC Cephalostat DEC Autofocus Additional features: Accessory cabinet 

This portable dental X-ray unit is high frequency machine. The body is small, light weight and nearly no radiation. It has excellent image quality, portable storage, save more space. It uses high frequency and DC international power supply. All of the components installed in the central PC board concentrated. Shock, set-up, electron tubes, all of them are insulation vacuum, sealed stereotype protection. There are also manual buttons installed on the surface of shell, as well as batteries and charges. This unit mainly suitable for oral pre-treatment for learning internal organizational structure, root depth and so on, is indispensable in daily life clinic equipment, especially for dental implant surgery. It also can connect with sensor, is great convenience. Checking and Security !  Caution: Please learn relative security measures and functions given in the file or on the unit. * Using the products after checking battery and the location of the device, make sure that is operates properly. * Checking all the power cords whether correctly and connected formally. * Operating the device in the designated order. * Recheck the cone connect with the patient’s face closely. * Keep the device and the cone clean. * Please use or operate the device and parts after taking a necessary periodic inspection. * If you discover some difference in the sensor images even if you inspected its x-ray exposure time in the same way as before, then it means that the radiation of x-ray is abnormal, you must stop using it immediately and allow it to be inspected. * Don’t use or store near the place which is possible to fire. * Don’t use or store where air pressure or temperature or moisture exceeds range. * Keep good ventilation and avoid direct sunlight, protect against the eroding of dust and corrosive air. * Don’t use or store near to chemicals or combustible gas. Tube voltage 60KV Tube current 1.5mA Exposure time 0.1--2.0s Frequency 30KHz Rate power 60VA Distance from skin to cone 130mm Tube focus 0.3mm*0.3mm Battery DC14.8V  6400mAh Charger input voltage AC100V-240V±10% Output voltage DC16.8V Ambient temperature 5℃~40℃ Relative temperature <75%RH Net weight 2.5KG Gross weight 3.5KG Size(mm) 138*165*185 Package size(mm) 365*330*265

Specification: Seal speed: 10±0.5m/min      Power: 500W Seal width: 12mm                  Weight: 18kg Seal margin: 0-35mm            Temperature range: 60-220℃ Temperature error ≤1%          Dimension: 560 x260x 220mm AC Power According to customer requirements 1.7 Color capacity touch screen, with Android operation system graphical user interface, built-in clock, and parameter scan be set up and stored; 2.In-built color touch control screen can be used without computer connection to set up or change the operation parameters, with English input methods or using optional scanning gun; 3.8 million records of sealing and printing information can be inquired by printing parameters database or you can use wireless router to adjust them; 4.Safe operation: If the sealing temperature and sealing pressure exceeds setting range, the machine will automatically stop working, which effectively guarantees the seal quality and safety; 5.Printing system can print medical device labels, marks and information; Printing of sterilization date,expiry date, lot No., Sterilizer No., operators and department conforms to relevant standard. 6.With in-built printer font width, space are adjustable, convenient for more information to be printed on narrow pouches; print function can be closed with one-key or partially activated;

Planmeca ProMax® is a complete maxillofacial imaging system. The design and operation principles are based on the latest scientific research, technological  innovations and the most demanding needs of modern-day radiology. Advanced technology •  Autofocus positions the focal layer automatically for perfect panoramic images •  Dynamic Exposure Control (DEC) measures the patient’s radiation transparency and automatically adjusts exposure values •  Patented SCARA (Selectively Compliant Articulated Robot Arm) technology guarantees an anatomically correct imaging geometry for clear, error-free images •  Easy upgrades – add cephalostat or 3D imaging capability at any time Effortless use •  Full-view patient positioning with triple-laser patient positioning lights •  Side entry for comfortable access •  Easy-to-use graphical interface •  Versatile Planmeca Romexis® 2D imaging software •  TWAIN support and full DICOM compliance Planmeca ProMax X-ray unit provides a wide range of extraoral imaging modalities: panoramic imaging for dental arch maxillary sinus imaging temporomandibular joint imaging 2D linear tomography cephalometry  Open positioning and easy use Free view to the patient from all directions Three laser positioning laser beams Easy access also for wheelchair patients Motorized patient positioning and temple supports Autofocus feature makes the positioning of the focal layer automatically. Autofocus takes first a short, low-dose scout image for searching landmarks and calculating the focal layer with the help of a special neural network algorithm. The user can monitor the suggested focal layer adjustment both on the control panel and on the image acquisition preview. The focal layer adjustments can be amended, or the user can simply accept the adjustments and continue to the final exposure. Dynamic Exposure Control (DEC) adapts the whole imaging chain individually for each patient's physio-anatomical characteristics to produce the optimal contrast and density. Both the X-ray source and the image receptor are automatically adjusted to produce the optimum image quality. Interactive, informative and intuitive colour TFT graphic user interface (GUI) Technical factors and selected programs digitally displayed Image preview Optimised image geometry and constant magnification Optimised image geometry and constant magnification Adjustable form of focal trough Automatic compensation for the cervical vertebrae shadow Full digital control Re-programmable flash EPROM Microprocessor controlled self-diagnostic control system with clear help guiding to correct use and error messages announcing hardware or software problems Constant potential, microprocessor controlled resonance mode generator Very high operating frequency 80 – 150 kHz Maximum ripple 670 Vpp (0.4%, 84 kV) Ultra short rise time, < 3 ms Very wide exposure parameters range, 1 – 16mA / 54 – 84 kV2(5) Low patient dose Universal power input including Power Factor Corrector, mains voltage fluctuations automatically compensated Reliable mechanical construction Small size and light weight, total weight 113 kg (249 lbs) Unique 3 joint SCARA (Selectively Compliant Articulated Robot Arm) technology enables complicated movements and versatile imaging geometries, smooth and quiet micro-step motors Telescopic body column without counterweight. Maximum height adjustable. Automatic four blade primary collimator Available as wall-mounted or free standing  Imaging mode: Basic panoramic programs Horizontal and Vertical segmenting Bitewing panoramic program Tomography: Digital tomography, Transtomography Child mode in all imaging programs to reduce the dose and to optimise the imaging geometry Cephalostat Planmeca ProCeph “one shot” cephalostat Digital Ceph Dimax4 (2 fixed sensors or 1 movable sensor) DEC (Dynamic Exposure Control): Panoramic DEC Cephalostat DEC Autofocus Additional features: Accessory cabinet 

This portable dental X-ray unit is high frequency machine. The body is small, light weight and nearly no radiation. It has excellent image quality, portable storage, save more space. It uses high frequency and DC international power supply. All of the components installed in the central PC board concentrated. Shock, set-up, electron tubes, all of them are insulation vacuum, sealed stereotype protection. There are also manual buttons installed on the surface of shell, as well as batteries and charges. This unit mainly suitable for oral pre-treatment for learning internal organizational structure, root depth and so on, is indispensable in daily life clinic equipment, especially for dental implant surgery. It also can connect with sensor, is great convenience. Checking and Security !  Caution: Please learn relative security measures and functions given in the file or on the unit. * Using the products after checking battery and the location of the device, make sure that is operates properly. * Checking all the power cords whether correctly and connected formally. * Operating the device in the designated order. * Recheck the cone connect with the patient’s face closely. * Keep the device and the cone clean. * Please use or operate the device and parts after taking a necessary periodic inspection. * If you discover some difference in the sensor images even if you inspected its x-ray exposure time in the same way as before, then it means that the radiation of x-ray is abnormal, you must stop using it immediately and allow it to be inspected. * Don’t use or store near the place which is possible to fire. * Don’t use or store where air pressure or temperature or moisture exceeds range. * Keep good ventilation and avoid direct sunlight, protect against the eroding of dust and corrosive air. * Don’t use or store near to chemicals or combustible gas. Tube voltage 60KV Tube current 1.5mA Exposure time 0.1--2.0s Frequency 30KHz Rate power 60VA Distance from skin to cone 130mm Tube focus 0.3mm*0.3mm Battery DC14.8V  6400mAh Charger input voltage AC100V-240V±10% Output voltage DC16.8V Ambient temperature 5℃~40℃ Relative temperature <75%RH Net weight 2.5KG Gross weight 3.5KG Size(mm) 138*165*185 Package size(mm) 365*330*265

This portable dental X-ray unit is high frequency machine. The body is small, light weight and nearly no radiation. It has excellent image quality, portable storage, save more space. It uses high frequency and DC international power supply. All of the components installed in the central PC board concentrated. Shock, set-up, electron tubes, all of them are insulation vacuum, sealed stereotype protection. There are also manual buttons installed on the surface of shell, as well as batteries and charges. This unit mainly suitable for oral pre-treatment for learning internal organizational structure, root depth and so on, is indispensable in daily life clinic equipment, especially for dental implant surgery. It also can connect with sensor, is great convenience. Checking and Security !  Caution: Please learn relative security measures and functions given in the file or on the unit. * Using the products after checking battery and the location of the device, make sure that is operates properly. * Checking all the power cords whether correctly and connected formally. * Operating the device in the designated order. * Recheck the cone connect with the patient’s face closely. * Keep the device and the cone clean. * Please use or operate the device and parts after taking a necessary periodic inspection. * If you discover some difference in the sensor images even if you inspected its x-ray exposure time in the same way as before, then it means that the radiation of x-ray is abnormal, you must stop using it immediately and allow it to be inspected. * Don’t use or store near the place which is possible to fire. * Don’t use or store where air pressure or temperature or moisture exceeds range. * Keep good ventilation and avoid direct sunlight, protect against the eroding of dust and corrosive air. * Don’t use or store near to chemicals or combustible gas. Tube voltage 60KV Tube current 1.5mA Exposure time 0.1--2.0s Frequency 30KHz Rate power 60VA Distance from skin to cone 130mm Tube focus 0.3mm*0.3mm Battery DC14.8V  6400mAh Charger input voltage AC100V-240V±10% Output voltage DC16.8V Ambient temperature 5℃~40℃ Relative temperature <75%RH Net weight 2.5KG Gross weight 3.5KG Size(mm) 138*165*185 Package size(mm) 365*330*265