Products

European standard Class N Thermodynamic vacuum system Chamber 70x320mm Nominal power 1600VA 2 programs preset without print function Dimension N. W./G.W. 28/32kg Size 64*48*43cm 8L tabletop autoclave, B-class prognosis vacuum type, in line with the European standard en13060. 8L autoclave is light weight, easy to move, and requires the smallest workbench space. It is an ideal solution for small enterprises such as dental clinic, tattoo, foot therapy, beauty, veterinary and small microbiology. Automatic tabletop autoclave with preset program. Comply with European standard EN13060 Built in independent fast steam generator to ensure fast disinfection cycle Rapid vacuum drying after sterilization User friendly interface. If the door is not locked correctly, the double door protection system can prevent cycle starting. The system also prevents the door from opening if the pressure inside the chamber is not equal to the atmospheric pressure outside the chamber In case of short circuit or electrical fault, the power supply will be cut off automatically. Be able to detect and determine the exact cause of any problem and issue specific error codes to the operator. The main water level switch in the main water tank controls the minimum and maximum water levels. Maintain automatic alarm.

Specification: Seal speed: 10±0.5m/min      Power: 500W Seal width: 12mm                  Weight: 18kg Seal margin: 0-35mm            Temperature range: 60-220℃ Temperature error ≤1%          Dimension: 560 x260x 220mm AC Power According to customer requirements 1.7 Color capacity touch screen, with Android operation system graphical user interface, built-in clock, and parameter scan be set up and stored; 2.In-built color touch control screen can be used without computer connection to set up or change the operation parameters, with English input methods or using optional scanning gun; 3.8 million records of sealing and printing information can be inquired by printing parameters database or you can use wireless router to adjust them; 4.Safe operation: If the sealing temperature and sealing pressure exceeds setting range, the machine will automatically stop working, which effectively guarantees the seal quality and safety; 5.Printing system can print medical device labels, marks and information; Printing of sterilization date,expiry date, lot No., Sterilizer No., operators and department conforms to relevant standard. 6.With in-built printer font width, space are adjustable, convenient for more information to be printed on narrow pouches; print function can be closed with one-key or partially activated;

Length200mm,width 10mm Power:400W Voltage:220VAC 50Hz Movable cycloid bar of package Easy fitting suitable page sterilized of multi size(50mm/70mm/100mm) Closed seal area of electro heating Adjustable seal temperature Equipped with paper knife of double edges Stainless steel base with aluminum roll holder. Qualified plastic cover, which can prevent from eroding and easy to be cleaned. Automatically alarm when wrong operation occurs or found broken spare parts. Automatic thermostat which leads to a longer service life.

Using the international advanced technology,efficient integrated design,high efficiency,low radiation. Using microcomputer intelligent control,not only remote controlled exposure,but more powerful function of low voltage alarm and high voltage protection. Micro focus technology,much more clear image and accurate diagnosis. The base has two modes of mobile and fixed ,pneumatic lift  soat ensures more convenient for dentist and more comfortable for patient. Can use lightroom dental film,imaging in one minute,maximum convenient dentist to diagnose. Can connect to dental digital imaging system,that is indispensable for clinicians to diagnose and root canal filling. Chip Type: CMOS APS External Dim (mm): Size 1.0 (Child/woman): 26.1*36.8 Size 1.5 (adult): 29.2*38.7 Active Area: Size 1.0 (Child/woman): 31.0*20.0 Size 1.5 (adult): 33.0*24.0 Image Pixel Size (um): 35 Active Pixels Size: 0.6mega Resolution (lp/mm)/Theoretical Heoretical: <20 Measured: <10 Dimension: N.W.: 1kg G.W.: 1.2kg Size: 27*21*8cm

1 Use the intermational advanced technology 2 high-efficiency and clear imaging, low leaking radiation is only 1% of national standard 3 Light touched button, controled with microcomputer, only press one button to select the exposue parameter, cibvebuebt  fast and accurately 4 Developing in light room, image in one minute, the doctor can diagnose conveniently for maximum 5 Pneumatic up-down seat, more convenient and more comfortable 6 It is for the use of the digital imaging system of mouth Specifications Power supply: 220V±10%,50HZ,1KVA Tube voltage 70KV Tube current 8mA Focus size 0.8mm or 0.4mm(as per demand of end-user) Total filtration 2.5mmAL Exposure time 0.2-4s Leak radiation: outside one meter≦0.002mGy/h，（national standard:0.25mGy/h） Package size: 152*57*26(cm) Net weight: 57kg 1. In order to ensure safety in operation and use, good ground lead must be installed well. 2. Because small X-ray machine’s thermal capacity is limited, attention should be paid to making the machine work intermittently. 3. Only during exposure process this machine will produce X-rays. It won’t produce X-rays in power-off state, neither in power-on state as long as not in exposure. 4. If any unforeseen circumstances occur during correct use, operators should cut off the power immediately and stop using the machine. It cannot be used again until it is overhauled and qualified. 5. Before leaving the factory, each X-ray device is equipped with an additional filter plate with the following specifications: 1.0/0.5mm aluminum sheets. 6. Every time when disassembling the machine, disassemble the head first and then other parts. 8. Every time after using the machine, recover the cross arm to the highest point, and then place the machine head in an equilibrium position. 9. Every time after using, sterilize and clean beam tube end that contacts the patient with medical alcohol. 10. Clean the machine surface with a dry cloth every week and inspect whether the connectors contact well. 11. Pay attention to machine maintenance. Check whether the indicator lights, display, rotary knob, switch, and remote control work normally; whether the X-ray source modules leak oil; whether when X-ray source modules expose produces any abnormal noise; or whether fixed screws in the mechanical part loose, and the like. 13. The rated capacity of the machine is 1.1kw. Please select power supply or power grid with a power supply capacity greater than 1.5kw. If network voltage in this region is abnormal, we recommend matching 1.5KW or higher industrial voltage stabilizer, to prevent damage to the machine and reduced machine life due to abnormal voltage.

Using the international advanced technology,efficient integrated design,high efficiency,low radiation. Using microcomputer intelligent control,not only remote controlled exposure,but more powerful function of low voltage alarm and high voltage protection. Micro focus technology,much more clear image and accurate diagnosis. The base has two modes of mobile and fixed ,pneumatic lift  soat ensures more convenient for dentist and more comfortable for patient. Can use lightroom dental film,imaging in one minute,maximum convenient dentist to diagnose. Can connect to dental digital imaging system,that is indispensable for clinicians to diagnose and root canal filling. Chip Type: CMOS APS External Dim (mm): Size 1.0 (Child/woman): 26.1*36.8 Size 1.5 (adult): 29.2*38.7 Active Area: Size 1.0 (Child/woman): 31.0*20.0 Size 1.5 (adult): 33.0*24.0 Image Pixel Size (um): 35 Active Pixels Size: 0.6mega Resolution (lp/mm)/Theoretical Heoretical: <20 Measured: <10 Dimension: N.W.: 1kg G.W.: 1.2kg Size: 27*21*8cm

Using the international advanced technology,efficient integrated design,high efficiency,low radiation. Using microcomputer intelligent control,not only remote controlled exposure,but more powerful function of low voltage alarm and high voltage protection. Micro focus technology,much more clear image and accurate diagnosis. The base has two modes of mobile and fixed ,pneumatic lift  soat ensures more convenient for dentist and more comfortable for patient. Can use lightroom dental film,imaging in one minute,maximum convenient dentist to diagnose. Can connect to dental digital imaging system,that is indispensable for clinicians to diagnose and root canal filling. Chip Type: CMOS APS External Dim (mm): Size 1.0 (Child/woman): 26.1*36.8 Size 1.5 (adult): 29.2*38.7 Active Area: Size 1.0 (Child/woman): 31.0*20.0 Size 1.5 (adult): 33.0*24.0 Image Pixel Size (um): 35 Active Pixels Size: 0.6mega Resolution (lp/mm)/Theoretical Heoretical: <20 Measured: <10 Dimension: N.W.: 1kg G.W.: 1.2kg Size: 27*21*8cm

Using the international advanced technology,efficient integrated design,high efficiency,low radiation. Using microcomputer intelligent control,not only remote controlled exposure,but more powerful function of low voltage alarm and high voltage protection. Micro focus technology,much more clear image and accurate diagnosis. The base has two modes of mobile and fixed ,pneumatic lift  soat ensures more convenient for dentist and more comfortable for patient. Can use lightroom dental film,imaging in one minute,maximum convenient dentist to diagnose. Can connect to dental digital imaging system,that is indispensable for clinicians to diagnose and root canal filling. Chip Type: CMOS APS External Dim (mm): Size 1.0 (Child/woman): 26.1*36.8 Size 1.5 (adult): 29.2*38.7 Active Area: Size 1.0 (Child/woman): 31.0*20.0 Size 1.5 (adult): 33.0*24.0 Image Pixel Size (um): 35 Active Pixels Size: 0.6mega Resolution (lp/mm)/Theoretical Heoretical: <20 Measured: <10 Dimension: N.W.: 1kg G.W.: 1.2kg Size: 27*21*8cm

Including: Mouth mirror, proble, forceps Remarks: 3 in 1 disposable dental kit Packing: 20 sets/bag, 25 baga/ctn. Carton size: 42x23x27cm Weight: 7.5kg

European standard Class N Thermodynamic vacuum system Chamber 70x320mm Nominal power 1600VA 2 programs preset without print function Dimension N. W./G.W. 28/32kg Size 64*48*43cm 8L tabletop autoclave, B-class prognosis vacuum type, in line with the European standard en13060. 8L autoclave is light weight, easy to move, and requires the smallest workbench space. It is an ideal solution for small enterprises such as dental clinic, tattoo, foot therapy, beauty, veterinary and small microbiology. Automatic tabletop autoclave with preset program. Comply with European standard EN13060 Built in independent fast steam generator to ensure fast disinfection cycle Rapid vacuum drying after sterilization User friendly interface. If the door is not locked correctly, the double door protection system can prevent cycle starting. The system also prevents the door from opening if the pressure inside the chamber is not equal to the atmospheric pressure outside the chamber In case of short circuit or electrical fault, the power supply will be cut off automatically. Be able to detect and determine the exact cause of any problem and issue specific error codes to the operator. The main water level switch in the main water tank controls the minimum and maximum water levels. Maintain automatic alarm.

Voltage: 220V-240V/50HZ-60HZ         Power:400W          Revolution:3000r.p.m/50HZ; 3000r.p.m/60HZ Scope of timing：4-16s Mode of Memory：5 kinds Automatic computer control & Numeral display 5 pre-set programs Fit for different moulage material and different mixed dosage 1. Imported motor, low noise and long service life 2. Microcomputer control, safe and reliable operation; 3. After mixing, the impression material has no bubbles, good elasticity, not easy to deform, and mold taking is clearer; 4. The setting time range is long, within 1-24 seconds, the user can choose according to the characteristics of different impression materials; 5. Three kinds of computer memories can be set according to user needs (the factory setting is 8 seconds "one spoon of powder", 10 seconds two spoons of powder", 12 seconds "three spoons of powder">; 6. The internal temperature control of the product is reliable, and it can work continuously for a long time without affecting the production of impression materials; it runs with low noise and is easy to operate. (1) There is a vent hole on the top of the mixing bowl cover. Please clean it to ensure that it is not blocked by impression powder and other sundries. (2) The weight of each mixing (total weight of water and impression powder) should be 25g-75g. If the weight of the mixture is out of this range, the noise of the machine will increase, and there will even be abnormal noises such as impacts, which may damage the machine in severe cases. (3) The optimal mixing weight designed for this machine is 58g , which is the best state of the machine at this time. (4) For the ratio of impression powder and water during mixing, please refer to the standard of the impression powder manufacturer. The supplied water bottle can help measure the amount of water required. Unscrew the bottle body and fill it with mixing water. After tightening, squeeze the bottle body by hand to measure the amount of water (you can also use the special instrument provided by the impression powder manufacturer to measure. According to our experience, a slight increase in the proportion of water will make The mixed impression powder is more delicate, but this will slightly increase the curing time). (5) The temperature of the stirring water should be 10-20°C, otherwise the curing time will be shortened, which is not conducive to operation (especially in summer).

Quickly conduct heat out and blow it into the nearby air 1. Please wipe the outside of the body gently with a neutral detergent and keep it dry 2 The inside of the stainless steel tank needs to be cleaned with clean water every day for impurities settled after distillation, monthly (it depends on the amount of dirt in the tank). Note (hot) water into the stainless steel tank to slightly higher than the dirt performance. Pour one to four tablespoons (depending on how dirty the tank is) of cleaning agent into the tank. Do not close the cover, plug in the main power supply, press the start button, and heat the stainless steel tank. #15. Pour out the water after 30 minutes and rinse the inside with clean water. If all the dirt cannot be removed at one time, the above actions can be repeated. The remaining dirt will not affect your health, please rest assured to use. 3. The water storage bucket can be disinfected and cleaned with hot (hot) water and will not deform. 4. In order to make the homemade distilled water more mellow, you can replace a water outlet every 2-3 months.